The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > RECORD

Reply
 
Thread Tools
  #1  
Old 07-08-2019, 07:36 PM
815C's Avatar
815C 815C is offline
AGF Sponsor
 
Join Date: Jul 2002
Location: The Hills Of Tennessee
Posts: 3,684
Default My solution for replacing monitor speaker stands

I don't have enough room on my old desk for my monitor speakers, and I used to have a cheap bar stool at each end of the desk for each speaker.

But I bought a 2x10 at the hardware store, stained it, and laid it across my 1940's Army Surplus desk.

Reply With Quote
  #2  
Old 07-09-2019, 05:02 AM
fitness1's Avatar
fitness1 fitness1 is offline
Charter Member
 
Join Date: Nov 2002
Location: Central Lower Michigan
Posts: 18,067
Default

I had the same thing for a long time, but my desk isn't as wide as yours and it was a little unstable (as realized during a minor earthquake!) My speakers are also a good bit larger than a standard studio monitor (B&W 8" two way about 10 by 10 by 18 and 20 lbs) so they need something solid!

It's important to get the tweeters at ear level, and I made some small stands for the desktop version like yours to achieve that, but when B&H had a sale on these at 35 shipped and I went back to them.

https://www.bhphotovideo.com/c/produ...tor_stand.html
__________________
"One small heart, and a great big soul that's driving"

Charis SJ Koa/BC Sitka
Charis GC EIR/Cedar
Mcknight/Poling GC Koa/Italian
Cordoba Solista EIR/Euro Spruce


Last edited by fitness1; 07-09-2019 at 05:11 AM.
Reply With Quote
  #3  
Old 07-10-2019, 11:19 AM
KevWind's Avatar
KevWind KevWind is online now
Moderator
 
Join Date: Apr 2008
Location: Edge of Wilderness Wyoming
Posts: 11,358
Default

You might want to consider some Sorbothane 1/2 spheres to decouple the speakers from the boards

https://www.amazon.com/Sorbothane-He...DJ66A8W36931W2
__________________
" Peace cannot be kept by force. It can only be achieved by understanding." Albert Einstein
Enjoy the Journey.... Kev...


KevWind at Soundcloud
Reply With Quote
  #4  
Old 07-10-2019, 11:51 AM
jim1960 jim1960 is offline
Registered User
 
Join Date: Sep 2015
Posts: 2,230
Default

Quote:
Originally Posted by KevWind View Post
You might want to consider some Sorbothane 1/2 spheres to decouple the speakers from the boards
Even with those, I'd be concerned that board laying across the desk is going to do something funky to the sound because it's still going to vibrate against the desk. If I had to go with that set up, I'd screw the board into the desk or glue it to the top.
__________________
Jim

2017 Circle Strings 00 bastogne walnut/sinker redwood
2015 Circle Strings Parlor shedua/western red cedar
2009 Bamburg JSB Signature Baritone macassar ebony/carpathian spruce
2004 Taylor XXX-RS indian rosewood/sitka spruce
2002 Taylor 814ce Limited cocobolo/sitka spruce
1988 Martin D-16 mahogany/sitka spruce


SoundCloud link
Spotify
YouTube
Reply With Quote
  #5  
Old 07-13-2019, 07:52 PM
Rudy4 Rudy4 is offline
Registered User
 
Join Date: Oct 2012
Posts: 2,251
Default

I've had a few different versions of the "add on bridge". This iteration is made so the Presonus Eris 5's can be positioned out from the wall, angled to where I sit, and the tweeters are ear level. My laser printer desk lamp and a few other items are also on the bridge.

I add the spacers to accommodate whatever else I want on the desk, so the PC fits nicely, as well as some controls stuff and my Blackjack interface can be slid back underneath when I'm not going to use it for a while. The keyboard and wireless mouse are on a pull out shelf of the small desk and some other stuff resides on the desk shelves below.

The bridge is attached solidly to the desk's top, so no worries about rattles. Headphones and various cords hang from hooks attached to the left side of the desk.

This is in a small room and works out very nicely.

Reply With Quote
  #6  
Old 07-25-2019, 08:17 PM
byudzai byudzai is offline
Registered User
 
Join Date: Feb 2018
Location: Bloomington, IN
Posts: 431
Default

i built this edison bulb pipe lamp speaker shelf thing. puts them a little high but i have them angled toward me. was a fun project.

__________________
Emerald X30 Padauk Custom
Emerald X30 Blue
1998 Gibson J200 Elite
1972 Martin D-28
McPherson Sable
Breedlove Oregon Myrtlewood
Breedlove Masterclass
Taylor PS16ce Macassar
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > RECORD

Thread Tools



All times are GMT -6. The time now is 06:10 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2000 - 2018, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=