#1
|
|||
|
|||
B-Band Undersaddle and Bridge Plate
This has two inputs, one part goes under the saddle and the other sticks to the bridge plate sort of like K&K pickup design. I tested it to work perfectly before removing from my Goodall. I'm going to let it go for $40 paypal friends and family and will include priority mail shipping. Powered with 9 volt battery (not included).
__________________
Beneteau Concert cutaway Sitka/Maple 2009 Beneteau Baritone Sitka/Walnut 2005 Beneteau Concert cutaway Adi/Honduras Rosewood 2003 Maple Beneteau for sale |
#2
|
|||
|
|||
More pics.....
__________________
Beneteau Concert cutaway Sitka/Maple 2009 Beneteau Baritone Sitka/Walnut 2005 Beneteau Concert cutaway Adi/Honduras Rosewood 2003 Maple Beneteau for sale |
#3
|
|||
|
|||
What width is the UST?
__________________
Epiphone DR-500MCE 2011 Gibson J-45 vintage sunburst 1964 Gibson J-45 cherry sunburst Martin SWDGT Martin SWJGT Martin MMV Dread Martin 000-21 |
#4
|
|||
|
|||
The UST which glues to the bridgeplate under the bridge is 2 3/4 Inches long and 1/2 inch wide. The other transducer goes under the actual bridge saddle would fit under most any acoustic guitar since it is one long length... runs up from under the guitar saddle thru a small hole in the top and fits under the saddle. Check out Youtube install instructions for more details on that.
__________________
Beneteau Concert cutaway Sitka/Maple 2009 Beneteau Baritone Sitka/Walnut 2005 Beneteau Concert cutaway Adi/Honduras Rosewood 2003 Maple Beneteau for sale |
#5
|
|||
|
|||
The undersaddle pickup width is what I need.... The fit of the undersaddle is crucial....
Thanks
__________________
Epiphone DR-500MCE 2011 Gibson J-45 vintage sunburst 1964 Gibson J-45 cherry sunburst Martin SWDGT Martin SWJGT Martin MMV Dread Martin 000-21 |
#6
|
|||
|
|||
Hi there, if I am not mistaken is this the A2.2-XOM? If so, are you sure it will still work after you've removed the bridgeplate transducer, which should have been glued on to the bridgeplate? Are you willing to allow a trial-period with refund in case it can no longer be used or is defective as a result of the removal?
|
#7
|
|||
|
|||
Quote:
HI, I don't know if I can actually measure the width of the undersaddle accuracy enough. Suffice it to say, it was used on a Goodall and would look to fit correctly on guitars like Collings, Martin, Taylor, etc. Probably not a good fit for a Kostal or extra wide saddle used by some luthiers today for better intonation purposes.
__________________
Beneteau Concert cutaway Sitka/Maple 2009 Beneteau Baritone Sitka/Walnut 2005 Beneteau Concert cutaway Adi/Honduras Rosewood 2003 Maple Beneteau for sale |
#8
|
|||
|
|||
the AST is the one goes under the bridge plate.
|
#9
|
|||
|
|||
Still looking for a buyer. There is a good installation pdf which tell the dimensions and installation tips.
https://www.lunaguitars.com/manuals/b-band_t55.pdf The AST is the "Acoustic Soundboard Transducer" which is a lot like a K&K in that it sticks to the bridge plate under the guitar. Everything worked perfectly before I removed it, shouldn't be a problem installing on another guitar.
__________________
Beneteau Concert cutaway Sitka/Maple 2009 Beneteau Baritone Sitka/Walnut 2005 Beneteau Concert cutaway Adi/Honduras Rosewood 2003 Maple Beneteau for sale |
#10
|
|||
|
|||
Still available and ready to ship.
__________________
Beneteau Concert cutaway Sitka/Maple 2009 Beneteau Baritone Sitka/Walnut 2005 Beneteau Concert cutaway Adi/Honduras Rosewood 2003 Maple Beneteau for sale |