The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Custom Shop

Reply
 
Thread Tools
  #151  
Old 03-20-2021, 02:24 PM
iim7V7IM7's Avatar
iim7V7IM7 iim7V7IM7 is offline
Charter Member
 
Join Date: Feb 2012
Location: An Exit Off the Turnpike in New Jersey
Posts: 5,152
Default

Don’t let is freak you out.... We wipe our guitars down will aqueous sprays and damp clothes don’t we?

Part of finishing is progressively applying finer and finer abrasives once much of the solvent has left the solid content of the nitro. When you are down to 1,500 grit you need a fluid (water) and a surfactant (soap) to keep it from filling up. Later on, other water based finer abrasive polishes may be used before it sees the rouge on the buffing wheel.

Quote:
Originally Posted by mhw48 View Post
I know it’s the correct technique, but a photo of a wet guitar just freaks me out!
That binding is really beautiful against the BRW.
__________________
A bunch of nice archtops, flattops, a gypsy & nylon strings…
Reply With Quote
  #152  
Old 03-28-2021, 04:23 PM
iim7V7IM7's Avatar
iim7V7IM7 iim7V7IM7 is offline
Charter Member
 
Join Date: Feb 2012
Location: An Exit Off the Turnpike in New Jersey
Posts: 5,152
Default Gettin Shiny...

Mark did his second wet sanding and first buffing today about 4-1/2 weeks after his last nitro wet out. You can begin to see some of the subtle coloration in the Brazilian Rosewood back and sides and the Koa back purfings are beginning to visual “pop”.



The segmented, radial Brazilian Rosewood rosette and mottled Koa rings looks great against the Italian Spruce top.

__________________
A bunch of nice archtops, flattops, a gypsy & nylon strings…
Reply With Quote
  #153  
Old 03-29-2021, 05:13 PM
iim7V7IM7's Avatar
iim7V7IM7 iim7V7IM7 is offline
Charter Member
 
Join Date: Feb 2012
Location: An Exit Off the Turnpike in New Jersey
Posts: 5,152
Default Neck on...

Mark uses a bolt on neck joint to the body, but like many luthiers glues the fretboard to the top. Some of the medullary in the Italian Spruce top is now on display.

__________________
A bunch of nice archtops, flattops, a gypsy & nylon strings…
Reply With Quote
  #154  
Old 03-29-2021, 06:37 PM
mhw48 mhw48 is offline
Registered User
 
Join Date: Mar 2018
Location: NYC
Posts: 456
Default

That top is beautiful
Reply With Quote
  #155  
Old 03-29-2021, 07:58 PM
rick-slo's Avatar
rick-slo rick-slo is offline
Charter Member
 
Join Date: Nov 2004
Location: San Luis Obispo, CA
Posts: 17,170
Default

Quote:
Originally Posted by iim7V7IM7 View Post
Mark uses a bolt on neck joint to the body, but like many luthiers glues the fretboard to the top. Some of the medullary in the Italian Spruce top is now on display.

Congrats. Almost ready.

The clamp in the photo looks just like the clamps I made fifty years ago (based on my 1966 copy of Irvind Sloane's "Classical Guitar Construction".
__________________
Derek Coombs
Youtube -> Website -> Music -> Tabs
Guitars by Mark Blanchard, Albert&Mueller, Paul Woolson, Collings, Composite Acoustics, and Derek Coombs

"Reality is that which when you stop believing in it, doesn't go away."

Woods hands pick by eye and ear
Made to one with pride and love
To be that we hold so dear
A voice from heavens above
Reply With Quote
  #156  
Old 03-29-2021, 08:52 PM
dcn's Avatar
dcn dcn is offline
Charter Member
 
Join Date: Jun 2013
Posts: 653
Default

Beautiful textures on the rosette, and satisfyingly silky top, too. Nice!
Reply With Quote
  #157  
Old 03-30-2021, 05:43 AM
eKat eKat is offline
Registered User
 
Join Date: Mar 2021
Posts: 39
Default

Whoa. . . this thing's gonna be a show stopper!
Reply With Quote
  #158  
Old 03-30-2021, 03:26 PM
iim7V7IM7's Avatar
iim7V7IM7 iim7V7IM7 is offline
Charter Member
 
Join Date: Feb 2012
Location: An Exit Off the Turnpike in New Jersey
Posts: 5,152
Default

Quote:
Originally Posted by mhw48 View Post
That top is beautiful
I hope that it sounds better than it looks (and knowing Mark, it will!)...

Quote:
Originally Posted by rick-slo View Post
Congrats. Almost ready.

The clamp in the photo looks just like the clamps I made fifty years ago (based on my 1966 copy of Irvind Sloane's "Classical Guitar Construction".
That doesn’t surprise me. Many builders started using both Irving Sloane’s or Arthur Overholtzer’s books for design, building approaches and fixtures...

Quote:
Originally Posted by dcn View Post
Beautiful textures on the rosette, and satisfyingly silky top, too. Nice!


Quote:
Originally Posted by eKat View Post
Whoa. . . this thing's gonna be a show stopper!
I hope that we can again have some luthier shows later 2021. If so, I will be sure to bring it to Woodstock..
__________________
A bunch of nice archtops, flattops, a gypsy & nylon strings…
Reply With Quote
  #159  
Old 03-30-2021, 06:11 PM
iim7V7IM7's Avatar
iim7V7IM7 iim7V7IM7 is offline
Charter Member
 
Join Date: Feb 2012
Location: An Exit Off the Turnpike in New Jersey
Posts: 5,152
Default Bridge on...

Mark has glued the Ebony bridge to the Italian Spruce top (see the photo below). He scapes the nitrocellulose lacquer off the top were the bridge is glued to the top with an perimeter inset of about 1/32”. Mark measures the lacquer thickness after scraping (The lacquer on my Bristlecone measured about .003”.) and he in turn scrapes a corresponding small step along the perimeter of the underside of the bridge so that it sits tight on the sound board. His belly bridge weighed 26 grams.

__________________
A bunch of nice archtops, flattops, a gypsy & nylon strings…

Last edited by iim7V7IM7; 03-30-2021 at 09:31 PM.
Reply With Quote
  #160  
Old 03-30-2021, 08:17 PM
Steve Kinnaird's Avatar
Steve Kinnaird Steve Kinnaird is offline
AGF Sponsor
 
Join Date: Aug 2009
Location: Nacogdoches, TX
Posts: 3,601
Default

That's a pretty sweet little gluing jig! Getting close now, Bob. Are your fingers starting to itch?

Steve
__________________
www.stephenkinnaird.com

Crafted in the Piney Woods
Reply With Quote
  #161  
Old 03-30-2021, 09:06 PM
iim7V7IM7's Avatar
iim7V7IM7 iim7V7IM7 is offline
Charter Member
 
Join Date: Feb 2012
Location: An Exit Off the Turnpike in New Jersey
Posts: 5,152
Default

It is a nice jig Steve....

Mark is the son of a machinist and you can see it in his approach (just look at those knurled knobs!). I think the itching may need to wait. While we may see strings within a week, the case from Jeff H may we the critical path. It was ordered 9-weeks ago and ETA is still TBD.

No big deal...I usually like to leave an instrument with its maker for a few weeks post strings on to allow it settle in, get some set up TLC and let its maker experience the wonders of their craft before sending it to me..

Quote:
Originally Posted by Steve Kinnaird View Post
That's a pretty sweet little gluing jig! Getting close now, Bob. Are your fingers starting to itch?

Steve
__________________
A bunch of nice archtops, flattops, a gypsy & nylon strings…
Reply With Quote
  #162  
Old 04-02-2021, 05:34 PM
iim7V7IM7's Avatar
iim7V7IM7 iim7V7IM7 is offline
Charter Member
 
Join Date: Feb 2012
Location: An Exit Off the Turnpike in New Jersey
Posts: 5,152
Default Under Load

Mark installed the Gotoh 510 tuners (with stock buttons for now) and prepped the Jescar EVO .043” x .080” fret wire the other day and strung up the guitar. He likes to have the guitar under string load for a day or so before shaping the fretboard and fretting the instrument.



He will replace the plastic buttons with custom Macassar Ebony buttons when he finishes it.

__________________
A bunch of nice archtops, flattops, a gypsy & nylon strings…
Reply With Quote
  #163  
Old 04-03-2021, 01:54 PM
iim7V7IM7's Avatar
iim7V7IM7 iim7V7IM7 is offline
Charter Member
 
Join Date: Feb 2012
Location: An Exit Off the Turnpike in New Jersey
Posts: 5,152
Default Shaping the Fretboard

Now that the guitar has been under string tension for a day of so, Mark went on to shape the fretboard this morning. The first photo shows his neck dial indicator tool in place over the center of the fingerboard.



The second photo shows a graph of the data points before doing any shaping. The nut is at the left end of the graph and the right end of the curve is a point near the sound hole. The upper curve is Mark’s theoretically perfect target curve. The lower curve is the actual shape of the fingerboard based on the dial indicator measurements. You can see in lower curve the the classic “body hump” at the neck joint.



The third photo shows the curve after shaping. Mark has found that it’s not necessary to match the “theoretical” curve exactly. Establishing a smooth curve that is close to the target it is his goal.



The fourth photo shows bass, middle and treble curves taken across the fretboard. The upper, yellow curve is the curve between the E and B strings. The lower yellow curve is between the low E and A strings. The treble curve is ‘flatter’ than the bass curve indicating less relief. Mark went on to correct the “kick up” seen at the right end of the graph after the photo was taken.

__________________
A bunch of nice archtops, flattops, a gypsy & nylon strings…
Reply With Quote
  #164  
Old 04-03-2021, 02:50 PM
mhw48 mhw48 is offline
Registered User
 
Join Date: Mar 2018
Location: NYC
Posts: 456
Default

The accursed body hump! I know it too well. On the other hand, I have never seen, heard of, nor even imagined a neck dial indicator tool. It is really fascinating to see how different luthiers work to solve common problems, often with quite individual solutions.
Reply With Quote
  #165  
Old 04-04-2021, 05:27 AM
cigarfan's Avatar
cigarfan cigarfan is offline
Music soothes the soul!
 
Join Date: Jan 2012
Location: Within the blast radius of Washington D.C.
Posts: 5,176
Default

Really cool Bob! Thanks for sharing.
__________________
Life is like a box of chocolates ....
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Custom Shop

Thread Tools





All times are GMT -6. The time now is 03:25 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=