#1
|
|||
|
|||
Best Double-Sided taper for PU Controls
The blend control came off on my new Martin 000-28e MD guitar so I was wondering what the best double-sided tape might be to repair it.
TIA, Larry
__________________
----------------------- Too many guitars, so my wife says... |
#2
|
|||
|
|||
It should read double-sided TAPE not taper! ;-)
__________________
----------------------- Too many guitars, so my wife says... |
#3
|
|||
|
|||
Quote:
Let the seller fix it at the store. Ron |
#4
|
|||
|
|||
The closest Martin authorized repair shop is 2+ hours away, so I just cleaned up the control and inside the guitar and used some thin 3m double sided tape and all is good.
__________________
----------------------- Too many guitars, so my wife says... |
#5
|
||||
|
||||
Most manufacturers will send you a replacement pad. If not, use 3M mounting tape from the hardware store.
__________________
Bryan |