#1
|
|||
|
|||
Newer model Guild bridge pins SIZE???
Hello,
First-time poster here. I just bought a new Guild D-240e. It is a fantastic guitar but I wanted to upgrade to a set of bone bridge pins with abalone dots to match the abalone on the headstock and rosette. Does anybody know what size pins I need? Thanks very much in advance! - (Shandy Glover) |
#2
|
|||
|
|||
Best to just ask Guild? They likely have spare parts for the U.S. made guitars and can tell you if they will fit their imports.
|
#3
|
||||
|
||||
Hi Shandy, It's going to be a 3 degree pin although the diameters (under the skirt, fattest part of the shaft) vary wildly on these from about .199" to .210" ...so you'd need either a 1.3T (.203") or 1T (.210") ..the 1T being more common on newer guitars. Unfortunately these are not very well standardized.
|