#2
|
||||
|
||||
The actual neck width would obviously not change but you might like the string spacing. You can opt to have either the low E or the high E maintain its distance from the edge of the neck or equally reduce the distance or each E string
__________________
David Webber Round-Body Furch D32-LM MJ Franks Lagacy OM Rainsong H-WS1000N2T Stonebridge OM33-SR DB Stonebridge D22-SRA Tacoma Papoose Voyage Air VAD-2 1980 Fender Strat A few Partscaster Strats MIC 60s Classic Vib Strat |
#3
|
|||
|
|||
I know the answer but it's already Monday...
|
#4
|
|||
|
|||
The guitar neck of course is a fixed size but the nut string spacing can be changed. I have a yamaha with 1-11/16 and an alvarez with 1-3/4, both have the same string spacing which I am about to change with a new nut on the alvarez. Bridge is more dependent on the pin spacings so not as straight forward to modify.
|