|
|
#1
12-03-2023, 09:42 PM
|
|||
|
|||
Setup for guitar demo?
Just picked up a sweet Martin OO 12 fret in all Walnut, and someone requested a sound clip or two to check out. I do record my own music in Pro Tools, but I find mic placement, eq, and mix to have a to do with final sound, so just wondering if you guys have any advice on a setup to get a good neutral representation of the guitar. Seems to be some interest in what an all Walnut guitar sounds like.
Normally I’m running two condensers into my interface, with one aimed toward the sound hole and the other at about the neck join. 
|
|
#2
12-03-2023, 10:30 PM
|
|||
|
|||
|
You can check out this, for starters: https://www.production-expert.com/pr...in-depth-guide
__________________
-Steve 1927 Martin 00-21 1986 Fender Strat 1987 Ibanez RG560 1988 Fender Fretless J Bass 1991 Washburn HB-35s 1995 Taylor 812ce 1996 Taylor 510c (custom) 1996 Taylor 422-R (Limited Edition) 1997 Taylor 810-WMB (Limited Edition) 1998 Taylor 912c (Custom) 2019 Fender Tele
|
|
#3
12-03-2023, 11:03 PM
|
||||
|
||||
|
Personally on my recordings I record with two mikes in a spaced pair configuration and usually around 16 to 18 inches away from the guitar in an acoustically treated room. You may need to record closer in a reflective room.
__________________
Derek Coombs Youtube -> Website -> Music -> Tabs Guitars by Mark Blanchard, Albert&Mueller, Paul Woolson, Collings, Composite Acoustics, and Derek Coombs "Reality is that which when you stop believing in it, doesn't go away." Woods hands pick by eye and ear
Made to one with pride and love To be that we hold so dear A voice from heavens above
|
