#1
|
|||
|
|||
Replacing adjustable bridge saddle
I recently acquired an old Gibson B-25 that has an original rosewood bridge and saddle. I like the tone it has, but it's a bit quiet so I want to try out a new saddle. Not going to replace the entire bridge but I ordered a direct replacement bone saddle to try out: https://www.philadelphialuthiertools...ustic-guitars/
Anyway, I'm just wondering how difficult this saddle swap would be. Is it as simple as just unscrewing the rosewood saddle, sanding down the bone a bit, and then screwing it back in? I've never done anything like this but just am curious if it's simple enough that I don't need to take it to a luthier. |
#2
|
|||
|
|||
You could try it with/without the screws. I currently have an Alvarez that sounds very lively with the metal piece - the weight of the screws does have an effect as far as I can discern. I wonder if these adjustable bridge guitars were braced to accommodate the extra weight.
The screws will be useless with the bone saddle. |
#3
|
|||
|
|||
The bone saddle should be a direct fit.....the rosewood saddles fit the same as the ceramic ones.
I have made a few of these bone adjustables, but I would not make another for the price of the CNC one. Note to Philadelphia Luthier Tools and Supplies.....'your' does not mean 'you are'. |
#4
|
|||
|
|||
Quote:
|
#5
|
|||
|
|||
Scroll down halfway.
http://www.fretnotguitarrepair.com/r...ge-replace.php Now I see the reason for the open ends of the bone replacement, shaped as the shown porcelain saddle. What I've experienced with Japanese adjustable saddles is the contact point between string and top being the wide screw head sitting on the wooden bridge, a washer to protect the wood from the turning screw head. |
#6
|
|||
|
|||
Figured I would post the resolution in case anyone is ever curious in the future. Replacing the rosewood saddle with the new bone one was incredibly easy, and I was able to manage it without any prior experience like this. I unscrewed the rosewood saddle, sanded down the bone saddle until it fit in the slot just right, and screwed it back in, all in the span of about 10 minutes. Sounds much better now so I'm very pleased.
|
#7
|
|||
|
|||
>> Note to Philadelphia Luthier Tools and Supplies.....'your' does not mean 'you are'.
We all make spelling or punctuation mistakes. As careful as I try to be, I've caught mistakes of my own in previous posts. Humbling.
__________________
Martin D-18 (1964) Martin D-28 (1971) Ibanez 2470NT (1977) Gibson ES-175 (1981) Gibson ES-165 (1992) Yamaha AEX-1500 (1996) D'Angelico EXL-1DP (2005) Peerless New York (2007) Epiphone Elitist Byrdland (2008) |
#8
|
|||
|
|||
I made this insert and it works great. It isn't glued in so it can be restored to original. it's a snug but not tight fit. Made out of ebony.
Ed
__________________
"Quote The Raven, NEVERMORE !" |