#16
|
|||
|
|||
Quote:
Its a very interesting info, thank you for sharing!
__________________
Blog de la Guitarra Acústica y Clásica |
#17
|
|||
|
|||
Quote:
This is my work board: The clamp in the middle here pushes on the bridge patch and the UTB holding the top down to the shape of the Solera. The braces of course are arched to fit too: You can see how it's dished out and the top is canted: The Upper Transverse Brace is arched: So when it's Complete it has a ramp from the head block to the top of the sound hole: |
#18
|
|||
|
|||
Quote:
Thank you very much for your kindness in sending these illustrative photographs. Now I fully understand how your system works. Congratulations, because it is evident that you have studied the problem of the neck angle in detail. I didn't know that in the case of acoustic guitars, the neck angle is towards the back, because I am used to thinking in a forward angle, as is the case with classical guitars and lutes. Therefore, these messages represent a very interesting learning for me and a vision never explored by me. Thanks!
__________________
Blog de la Guitarra Acústica y Clásica |
#19
|
|||
|
|||
It would be really cool if Bruce would post a picture or two of his 'luthier's apprentice', if I can remember the name right. I have searched for it and other than just glimpses of his while he had a guitar on it, it is about as elusive as the Loch Ness Monster.
__________________
Fred |
#20
|
||||
|
||||
“The Apprentice” is a fixture made and marketed by Bill Schmidt, who stepped back about 10 years ago. It holds an instrument securely buy the body and the neck, and is quickly adjustable to hold any size guitar as well as just about any other string instrument. I use it mostly for set up work on guitars and violins. It is NOT a solera or work board equivalent. . . Although it could hold one, I suppose. Several on my peers in Northern California adapted the Apprentice to their work. Allegedly, mine was made for Ervin Somogyi, who didn’t take to it.
I am not in the shop at the moment, but will add a picture later. |
#21
|
|||
|
|||
Darn, confused again. But I guess everybody wins knowing more of Bruce's methods.
__________________
Fred |
#22
|
|||
|
|||
Bruces’ “apprentice” is so well used, I’d assumed it was something he built decades ago. But as I started checking it out to build similar, I found out he’d bought it. Not long afterwards, a new, unused one came up for sale, and I didn’t need to think twice. I was originally thinking of posting pictures and plans for it, and tried reaching out to get permission, but never got a response. I’m hesitant to go further, but it’s a great tool -
Here I have it mounted on an old outboard tool rest stand - very heavy and stable, but have since moved it to a cabinet for the drawers to hold tools. There is a base assembly that is a iron unit I most readily identify as the base for an old mitre vise -it has the ability to rotate up about 90d, and spin around 360d, so you can lock it in at almost any angle or arrangement. It does not adjust up/down, which would be useful. I can take more pics if desired - but thats essentially what it is -
__________________
More than a few Santa Cruz’s, a few Sexauers, a Patterson, a Larrivee, a Cumpiano, and a Klepper!! |
#23
|
|||
|
|||
Quote:
__________________
Fred |
#24
|
|||
|
|||
Quote:
|
#25
|
||||
|
||||
Tad's picture is easier to understand, but here's mine. I have it mounted on an Optometrists table, and also have my HHG glue-pot, my set up tools, and other things hung on the table where they-re handy. It's been in the same spot for long enough to refinish the surrounding floor with HHG.
|
#26
|
|||
|
|||
Looks like some sort of medieval torture device
|
#27
|
|||
|
|||
Always love seeing pictures of your shop.
__________________
Fred |
#28
|
|||
|
|||
I'm wondering what he uses that big brush for
|
#29
|
|||
|
|||
Others use a Tonerite. Bruce gently wakes his guitars up.
__________________
Fred |