#1
|
|||
|
|||
Build: Chasing Tone with a Tom Doerr Legacy Select
With all of my commissions, the goal has always been the creation of an instrument with a particular, specific Voice to complement those of the superb guitars and mandolins I am already privileged to own. Achieving that Voice is paramount and determines everything else about the build.
I choose my builders very carefully; those whose craftsmanship, attention to detail, fit & finish and sense of design, all of which contribute the look of the guitar, meet my standards, so I don’t have to concern myself with those areas further. After all, Doc Watson never cared about what his guitars looked like. This allows the conversations between us to remain focused on achieving the target Voice. I make a few ergonomic specifications (a cutaway, EVO frets, my preferred neck width & profile), but once the builder and I are confident that we share a clear understanding of the sonic goal to which all other decisions will be subservient, I leave most build decisions, including body size, the woods to be used, type of finish, etc. in the capable hands of the person whose task it is to produce it. Where a decision is required of me regarding the look of the instrument (for example, choosing a rosette design), I generally keep it simple and select from among the builder's usual options. Any customization I might request will generally concern the Voice, but I since I select my builders because I appreciate their signature tone, I don't ask that they build me something with a Voice that sounds like anyone other than themselves. I had long admired Tom Doerr’s work and remembered playing one of his wonderful instruments at nearby Dream Guitars some years back, so last spring I drove up from NC to the Artisan Guitar Show in Harrisburg, PA, specifically to sample the guitars Tom was bringing to display. When I got home I sent him a deposit. Now, some 14 months later, Tom has begun building a Legacy Select model to be personally delivered to me when Tom arrives to take part in the Luthiers Exhibit during Guitar Week at the Swannanoa Gathering in late July, and I look forward to sharing the process with you as it takes shape. Tom and I are going for a pretty lofty goal in this guitar’s Voice, and he’s using some of the very finest wood in his stash to achieve it. Here’s a shot of the woods he’ll use. On the right you can see some of his highest grade Swiss moon spruce for the top (note the crescent moon in the corner). The mahogany neck block is at the top, with the Brazilian rosewood back & sides in the middle and the outline of the Brazilian fretboard drawn on the piece on the left. All of the Brazilian rosewood used on this guitar, from the rosette to the tiniest pieces of top trim, is from the same plank of wood. The straight-grained Brazilian back. A closeup of the laminated neck block The top being joined Back being joined Stay tuned...
__________________
Jim Magill Director, The Swannanoa Gathering Guitars:'07 Circa OM, '09 Bashkin 00-12fret, '10 Circa 00 12-fret, '17 Buendia Jumbo, '17 Robbins R.1, '19 Doerr Legacy Select, '12 Collings 000-28H Koa. Pre-War guitars: '20 0-28, '22 00-28, '22 000-28. Mandolins: '09 Heiden Heritage F5, '08 Poe F5 , 1919 Gibson F-4, '80 Monteleone Grand Artist mandolin, '83 Monteleone GA (oval),'85 Sobell cittern. Last edited by jmagill; 07-16-2019 at 07:17 AM. |
#2
|
||||
|
||||
This will be fun to watch - knowing Tom as I do I'm very confident you'll be "over the moon" upon delivery!
__________________
"One small heart, and a great big soul that's driving" |
#3
|
||||
|
||||
+1 on this!! A great guitar will emerge from this process. Beyond that, a wonderful connection for you with Tom's Doerr guitar family!
Though it's been 5 years (exact date was Tuesday of this week) since my Legacy arrived, Tom and I are still in touch pretty regularly. I'll enjoy watching this one the whole way!! Congrats!
__________________
1993 Bourgeois JOM 1967 Martin D12-20 2007 Vines Artisan 2014 Doerr Legacy 2013 Bamburg FSC- 2002 Flammang 000 12 fret 2000 McCollum Grand Auditorium ______________________________ Soundcloud Spotify |
#4
|
|||
|
|||
At the Artisan Show I was also privileged to meet Tom's other family, his beautiful wife Alisa and daughters Isabel, Anna and little Aleah. All as lovely as his gorgeous guitars...
__________________
Jim Magill Director, The Swannanoa Gathering Guitars:'07 Circa OM, '09 Bashkin 00-12fret, '10 Circa 00 12-fret, '17 Buendia Jumbo, '17 Robbins R.1, '19 Doerr Legacy Select, '12 Collings 000-28H Koa. Pre-War guitars: '20 0-28, '22 00-28, '22 000-28. Mandolins: '09 Heiden Heritage F5, '08 Poe F5 , 1919 Gibson F-4, '80 Monteleone Grand Artist mandolin, '83 Monteleone GA (oval),'85 Sobell cittern. |
#5
|
||||
|
||||
That's fantastic! And, I'm a little jealous! I know we'll meet personally one day!! What a great guy!
__________________
1993 Bourgeois JOM 1967 Martin D12-20 2007 Vines Artisan 2014 Doerr Legacy 2013 Bamburg FSC- 2002 Flammang 000 12 fret 2000 McCollum Grand Auditorium ______________________________ Soundcloud Spotify |
#6
|
|||
|
|||
The top & back are now out of the go-bar deck. Here's the joined back.
The sides have also been bent. Here's one of the sides, wet down in preparation for the bending. This also gives some idea of what the color and figuring of the sides will look like under finish. Here are the heating blankets that the sides will go between before they go into the side bender. Clamped & ready... In the bender. The sharper-eyed among you may notice that there appear to be two pieces of wood between the blankets. Tom uses double sides on his guitars. The inner sides on this one are cocobolo. The Brazilian rosewood is now taking a new shape for its future as a fine guitar...
__________________
Jim Magill Director, The Swannanoa Gathering Guitars:'07 Circa OM, '09 Bashkin 00-12fret, '10 Circa 00 12-fret, '17 Buendia Jumbo, '17 Robbins R.1, '19 Doerr Legacy Select, '12 Collings 000-28H Koa. Pre-War guitars: '20 0-28, '22 00-28, '22 000-28. Mandolins: '09 Heiden Heritage F5, '08 Poe F5 , 1919 Gibson F-4, '80 Monteleone Grand Artist mandolin, '83 Monteleone GA (oval),'85 Sobell cittern. Last edited by jmagill; 06-03-2019 at 11:19 AM. |
#7
|
|||
|
|||
Quote:
|
#8
|
|||
|
|||
Next up: building the rosette.
In looking at photos of Tom's guitars, several of them had sound holes bound in ebony, a look I liked, and since the body, headplates, fretboard and bridge of this guitar will all be Brazilian rosewood bound in ebony, I thought an ebony-bound sound hole would complement them nicely. All that was left was to choose one of Tom's Braz. rosettes. Tom sent me photos of the rosettes he's used before and there was one of his more recent designs I favored, but the guitar's soundhole wasn't bound. I work a lot in Photoshop, so it was no problem to create a mockup of the rosette with a bound sound hole and send it to Tom. Tom responded this way: I thank you for Photoshopping it because I have often thought about doing it but it never looked right in my mind. This rosette will definitely be a go-to for me in the future. Then he went to work. Here's the top with some of the materials used to make the rosette. The rosette nears completion. Trimming the excess from the soundboard. The finished rosette against the back and a closeup of the sound hole binding.
__________________
Jim Magill Director, The Swannanoa Gathering Guitars:'07 Circa OM, '09 Bashkin 00-12fret, '10 Circa 00 12-fret, '17 Buendia Jumbo, '17 Robbins R.1, '19 Doerr Legacy Select, '12 Collings 000-28H Koa. Pre-War guitars: '20 0-28, '22 00-28, '22 000-28. Mandolins: '09 Heiden Heritage F5, '08 Poe F5 , 1919 Gibson F-4, '80 Monteleone Grand Artist mandolin, '83 Monteleone GA (oval),'85 Sobell cittern. Last edited by jmagill; 05-21-2019 at 03:41 PM. |
#9
|
|||
|
|||
That looks awesome!
I've always really preferred the look of a bound sound hole...
__________________
2013 Stehr Auditorium (Carpathian/Myrtle) 2015 Stehr Auditorium (Adi/BRW) 2020 Baranik Meridian (Blue Spruce/Manchinga) 2020 Wilborn Arum (Tunnel 14/Coco) 2021 Kinnaird Graybeard (BC Cedar/Bog Oak) 2022 Kinnaird CS Student Build (Adi/Padauk) 2023 Kinnaird FS (Italian/Koa) Last edited by Nemoman; 05-15-2019 at 10:39 AM. Reason: rewording |
#10
|
|||
|
|||
FYI, here's the mockup I made for Tom & I to try out ideas. This is not an actual guitar – yet. Just playing around with graphic elements to see what they look like... I've also included the original close-up photo of the rosette.
What I added or replaced in this mockup was the rosette I liked, with ebony sound hole binding, circular fret markers with ebony dot centers on a Brazilian fretboard, and I lightened all the Braz. elements and boosted the saturation slightly since Tom told me the Braz. he'd be using on my guitar is lighter in color than some. I expect the actual guitar to look similar to this, but we have a long way to go yet.
__________________
Jim Magill Director, The Swannanoa Gathering Guitars:'07 Circa OM, '09 Bashkin 00-12fret, '10 Circa 00 12-fret, '17 Buendia Jumbo, '17 Robbins R.1, '19 Doerr Legacy Select, '12 Collings 000-28H Koa. Pre-War guitars: '20 0-28, '22 00-28, '22 000-28. Mandolins: '09 Heiden Heritage F5, '08 Poe F5 , 1919 Gibson F-4, '80 Monteleone Grand Artist mandolin, '83 Monteleone GA (oval),'85 Sobell cittern. Last edited by jmagill; 05-15-2019 at 05:15 PM. |
#11
|
|||
|
|||
You have very good photo shop skills - the photos look very realistic. It looks like it will be q handsome guitar when it is done.
__________________
In the end it is about who you love above yourself and what you have stood for and lived for that make the difference... |
#12
|
||||
|
||||
GO TOM DOERR....!!!! Very exciting, congrats, thx for sharing...
__________________
onedayatatime |
#13
|
|||
|
|||
MAN I am jealous. Congrats and really can't wait to see how this comes together.
__________________
Dustin Furlow -Award-winning songwriter/guitarist, Visual storyteller -D’Addario, G7th and K&K Sound Artist -Music on Spotify, Apple Music and YouTube: www.youtube.com/dustinfurlow -New album "Serene" (Oct '23) and tablature available at www.dustinfurlow.com |
#14
|
||||
|
||||
My goodness, that wood looks incredible. Shaping up to be an exquisite guitar.
|
#15
|
|||
|
|||
Back & sides progress.
One clarification from Tom about his 'double sides': I actually do more of a laminate. I have the outer wood and then I use a thinner inner wood and a thinner middle wood between the two which is cross grain wood. The reason for this is it's much stronger doing 3 ply. If you look at any good laminate there is always a odd number of laminates with alternating grain direction. It stabilizes the wood and it's virtually crack resistant. I just use the term double sides for the lack of confusion. Plus, this is top secret stuff man! So don't tell anybody.... Here are some B&S parts before lamination. The smaller piece is for the cutaway. The sides being laminated using a vacuum press. Trimming the excess from the back. Note the Band-Aid. Tom puts his heart and soul (and a little blood) into every guitar... The space alien building my guitar. Thicknessing the back.
__________________
Jim Magill Director, The Swannanoa Gathering Guitars:'07 Circa OM, '09 Bashkin 00-12fret, '10 Circa 00 12-fret, '17 Buendia Jumbo, '17 Robbins R.1, '19 Doerr Legacy Select, '12 Collings 000-28H Koa. Pre-War guitars: '20 0-28, '22 00-28, '22 000-28. Mandolins: '09 Heiden Heritage F5, '08 Poe F5 , 1919 Gibson F-4, '80 Monteleone Grand Artist mandolin, '83 Monteleone GA (oval),'85 Sobell cittern. Last edited by jmagill; 05-18-2019 at 08:13 AM. |