#1
|
|||
|
|||
Taylor removable pickguard
I was thinking of just picking one of these up for my new RainSong CO-WS1000N2...
Ideally it would just fit on there without any work...Anyone know for sure if this would be the case? Anyone know how the typical Taylor sound hole size compares to a RainSong? Info that’s a bit hard to figure out...The description for the Pickguard doesn’t say much.
__________________
2020 Yamaha LL56 Custom 2021 Boucher SG-51-BMV 2020 RainSong CO-WS1000N2 2019 PRS Silver Sky |
#2
|
|||
|
|||
Quote:
__________________
Martin HD-28 Sunburst/Trance M-VT Phantom Martin D-18/UltraTonic Adamas I 2087GT-8 Ovation Custom Legend LX Guild F-212XL STD Huss & Dalton TD-R Taylor 717e Taylor 618e Taylor 614ce Larrivee D-50M/HiFi Larrivee D-40R Blue Grass Special/HiFi Larrivee D-40R Sunburst Larrivee C-03R TE/Trance M-VT Phantom RainSong BI-DR1000N2 Emerald X20 Yamaha FGX5 Republic Duolian/Schatten NR-2 |
#3
|
|||
|
|||
Quote:
__________________
2020 Yamaha LL56 Custom 2021 Boucher SG-51-BMV 2020 RainSong CO-WS1000N2 2019 PRS Silver Sky |
#4
|
|||
|
|||
It's very thin polyurethane. You will be able to see the unidirectional grain if you hold it up to the light just right. You should be just fine with the pick guard adhering though. I wouldn't even worry about it. I had a John Pearse armrest and a clear guard on my RainSong and had zero issues with them staying put.
__________________
Don't chase tone. Make tone. |
#5
|
|||
|
|||
Quote:
__________________
jf45ir Free DIY Acoustic Guitar IR Generator .wav file, 30 seconds, pickup left, mic right, open position strumming best...send to direct email below I'll send you 100/0, 75/25, 50/50 & 0/100 IR/Bypass IRs IR Demo, read the description too: https://youtu.be/SELEE4yugjE My duo's website and my email... [email protected] Jon Fields |
#6
|
||||
|
||||
I used a couple of Taylor removable pick guards on Taylors and really didn't like them because they weren't very clear. As far as Rainsongs, I'm partial to black pickguards - I like the contrast between the black pickguard and the carbon fiber weave...
__________________
Emerald X20 Emerald X20-12 Fender Robert Cray Stratocaster Martin D18 Ambertone Martin 000-15sm |
#7
|
|||
|
|||
Quote:
Did you find there were any issues getting the Taylor one to adhere without bubbles? I saw some pictures on musiciansfriend, or one of those sites, as part of a review and it included pictures of one on a Rainsong...it was bubbles all over the place...buddy said he couldn’t not have it be like that. Also, did you remove and add yours often or just leave it on for long periods? Just curious...appreciate your time and thoughts...
__________________
2020 Yamaha LL56 Custom 2021 Boucher SG-51-BMV 2020 RainSong CO-WS1000N2 2019 PRS Silver Sky |
#8
|
|||
|
|||
Maybe I can find an electrostatic removable black one...doubt it...I’ll take a look...might look okay on the finish of the CO-WS1000N2...not sure...I agree it probably would for sure look good on a finish like say the classic series or similar...
__________________
2020 Yamaha LL56 Custom 2021 Boucher SG-51-BMV 2020 RainSong CO-WS1000N2 2019 PRS Silver Sky |
#9
|
|||
|
|||
Quote:
https://www.stringsbymail.com/kling-...lack-1314.html I suppose it being black would solve any bubbling problems too...harder to deal with on clear ones if they occur... Only weird thing with this product I linked, the manufacturer writes their brand name on the pick guard....bit weird...lol...not the end of the world I guess...
__________________
2020 Yamaha LL56 Custom 2021 Boucher SG-51-BMV 2020 RainSong CO-WS1000N2 2019 PRS Silver Sky |
#10
|
||||
|
||||
I'm one who likes both the look and protection afforded by a pickguard on my Rainsongs as opposed to the bubbles that seem to accompany "clear" ones. I don't currently own a black Rainsong but recall having a removable black pickguard on a previous black Rainsong. Can't recall where it came from. Both of the ones shown are tobacco burst Hybrid models, and the one on the left is a WS shape...
__________________
Emerald X20 Emerald X20-12 Fender Robert Cray Stratocaster Martin D18 Ambertone Martin 000-15sm Last edited by RP; 11-20-2021 at 07:07 AM. |
#11
|
|||
|
|||
Quote:
https://www.ebay.com/itm/UltraThin-C...4WhPE7Q1zlt__Q
__________________
jf45ir Free DIY Acoustic Guitar IR Generator .wav file, 30 seconds, pickup left, mic right, open position strumming best...send to direct email below I'll send you 100/0, 75/25, 50/50 & 0/100 IR/Bypass IRs IR Demo, read the description too: https://youtu.be/SELEE4yugjE My duo's website and my email... [email protected] Jon Fields |
#12
|
|||
|
|||
You should be able to see a uniform scattering of tiny pits in the finish where the thin polyurethane has sunk into the carbon-fiber weave.
__________________
Martin HD-28 Sunburst/Trance M-VT Phantom Martin D-18/UltraTonic Adamas I 2087GT-8 Ovation Custom Legend LX Guild F-212XL STD Huss & Dalton TD-R Taylor 717e Taylor 618e Taylor 614ce Larrivee D-50M/HiFi Larrivee D-40R Blue Grass Special/HiFi Larrivee D-40R Sunburst Larrivee C-03R TE/Trance M-VT Phantom RainSong BI-DR1000N2 Emerald X20 Yamaha FGX5 Republic Duolian/Schatten NR-2 |
#13
|
|||
|
|||
Steelvibe suggests this guy, and it seems to review quite well...a lot of folks saying it adheres super well without bubbles, and remains easy to remove if needed...it is the cling type...I wonder what the secret sauce is that makes it so much better than the Taylor...
Only thing I can’t get my head around is the price...lol https://www.amazon.ca/Healingshield-...%2C184&sr=8-91
__________________
2020 Yamaha LL56 Custom 2021 Boucher SG-51-BMV 2020 RainSong CO-WS1000N2 2019 PRS Silver Sky |
#14
|
||||
|
||||
Quote:
__________________
Emerald X20 Emerald X20-12 Fender Robert Cray Stratocaster Martin D18 Ambertone Martin 000-15sm |
#15
|
|||
|
|||
Quote:
Gotta pay the tax for being a Canadian I guess ;-0
__________________
2020 Yamaha LL56 Custom 2021 Boucher SG-51-BMV 2020 RainSong CO-WS1000N2 2019 PRS Silver Sky |