#1
|
|||
|
|||
MX-T soundhole tuner removal
If possible, I want to remove the tuner as it`s pretty inaccurate and looks ugly imho.
So, after unsticking it from the top, can I remove it by just going into the soundhole with some mini cutters and snip the tuner wire ? Will the pickup system still work as normal ? As you can tell, I know very little about electrics. Thanks for any advice |
#2
|
|||
|
|||
If you don’t get an answer from someone who knows contact Fishman Customer Service.
You can send them a message on their website. They are kinda slow but they should eventually answer. Best of luck. _RP |
#3
|
|||
|
|||
Quote:
__________________
Gear: PRS Hollowbody II Piezo, Martin HPL 000, PRS Angelus A60E, Martin 000-15M |
#4
|
|||
|
|||
Thank you both for your replys.
Very helpful. |
#5
|
||||
|
||||
The Sonitone/MX-T isn't exactly my favorite pickup and I'm sure I'll upgrade at least one of my gig guitars at some point. But I've found the tuner useful simply because it mutes the guitar--and then I can tune with my Fender Bullet clip-on.
|
#6
|
|||
|
|||
__________________
=================================== '07 Gibson J-45 '68 Reissue (Fuller's) '18 Martin 00-18 '18 Martin GP-28E '65 Epiphone Zenith archtop |
#7
|
|||
|
|||
Quote:
__________________
Gear: PRS Hollowbody II Piezo, Martin HPL 000, PRS Angelus A60E, Martin 000-15M |
#8
|
|||
|
|||
Just to say thank you to everyone who replied.
I have now successfully removed the tuner and all is well. Kind regards Kevin |
#9
|
|||
|
|||
OK now remove the rest of that pickup and slap an Anthem SL in there
__________________
Gear: PRS Hollowbody II Piezo, Martin HPL 000, PRS Angelus A60E, Martin 000-15M |
#10
|
|||
|
|||
Ha ha, don't worry, it's on order.
|
#11
|
|||
|
|||
__________________
Gear: PRS Hollowbody II Piezo, Martin HPL 000, PRS Angelus A60E, Martin 000-15M |