#16
|
|||
|
|||
Exactly my experience!
__________________
"Lift your head and smile at trouble. You'll find happiness someday." |
#17
|
|||
|
|||
I am going to contact LA Guitars and see what he has. Their website doesn't have much but he's gotten a lot of good comments. Thank You.
|
#18
|
|||
|
|||
Hmm, I see a lot of CF guitars listed at LAguitars.
From my smart phone: > Menu > Guitars > By brand Blackbird Guitars - 7 guitars, 4 ukuleles .. California San Fran Composite Acoustics - 2 guitars .. Alabama (discontinued new old stock) Journey Instruments - 10 guitars .. China KLOS Guitars - 3 guitars .. Utah McPherson Guitars - 7 guitars .. Wisconsin RainSong Guitar - 41 guitars .. Washington state Ted cn tell you what's available and can order from makers on one or two months turn around. Also ask about options like necks in medium scale (24" to 24.9") and short scale (22 1/2" to 24"), and colours (ex: RainSong $75 tobacco, marine bursts), etc. Cheers .
__________________
2018 RainSong H-DR1000N2/T copper burst - carbon fibre 2016 CA Cargo black - carbon fibre 2016 Fender Telecaster thinline 2014 Fender Concert Pro (New Hartford) - red spruce, mahogany Last edited by casualmusic; 03-04-2021 at 07:45 PM. |
#19
|
|||
|
|||
Thanks I'll be contacting Ted. Last time I looked there were many listed but when I pulled them upany had not arrived yet. Thanks for the reminder on scale length too.
|
#20
|
|||
|
|||
I had a custom Emerald X7 made a few years ago and I had it made without a truss rod. I wanted the neck end of the guitar to be as light as possible to reduce the chance of any neck dive like I've experienced on some of the small guitars that i have had. It will balance quite nicely on my leg without having to hold it up. The action is fantastic and it hasn't moved a bit since I've owned it and I don't expect it to ever change. I would definately do it again if i have another custom Emerald made.
|