#1
|
|||
|
|||
UST not playing nice with humbuckers
I added a UST to a board with 2 existing humbuckers and the UST is coming out with a lot of treble and the humbuckers have flattened out. What do I need to put between the UST and the board to get it all to play nice? Thanks!
|
#2
|
||||
|
||||
An active preamp/blender of some sort. You can't combine those two very different animals passively without serious degradation of sound.
__________________
James May Audio Sprockets maker of ToneDexter James May Engineering maker of the Ultra Tonic Pickup |
#3
|
|||
|
|||
The board they're all going into is a preamp. So would I need another preamp before the board?
|
#4
|
|||
|
|||
Is each source routed to a separate preamp on the "board" before blending? Please add detail to your described signal chain.
|
#5
|
|||
|
|||
Quote:
Pictures below. Ignore the question marks on the parts. This was before I really had the lay of the land. https://imgur.com/a/hX0zeIx |