#1
|
|||
|
|||
Acoustic Pedalboard
In the process of putting together an acoustic pedalboard with a few pedals, what cables is eveyone having good luck with? Thanks in advance
|
#2
|
|||
|
|||
I've found in some cases that your instrument cable can make a difference, but any middle-of-the-road patch cable for a pedalboard is just fine. Spend all you want on oxygen-free, neutrik-ended unobtainium patch cables, but most any half-decent cable is just as good.
|
#3
|
|||
|
|||
I try for Neutrik connectors. For low profile short patch cables, MXR have worked well for me. The ribbon type cables are very low profile and I've had success with them too.
https://www.sweetwater.com/store/det...E&gclsrc=aw.ds https://www.sweetwater.com/store/det...E&gclsrc=aw.ds
__________________
As my username suggests, huge fan of Yamaha products. Own many acoustic-electric models from 2009-present and a couple electric. Lots of PA too. |
#4
|
|||
|
|||
Switchcraft Pancake jacks are the best… and reliable too, I’ve had a couple of leads made up with them for years of heavy use and still going strong.
The beauty of them is that they allow you to put your pedals super-close together and get more on the board. If you want the ultimate, use them with Mogami cables. I honestly can’t hear a difference though, and I tend to go with Somer brand cable for everything and solder my own ends on… it’s cheaper, very well-shielded and flexible.
__________________
Rick Yamaha MIJ CJX32 Avalon L32 Avalon A32 Legacy Lowden 022 Gibson J-185 Takamine TNV360sc Cole Clark Fat Lady 3 |
#5
|
|||
|
|||
Thank you everyone for the tips, will look at these. Kinda like the flat ribbon style. Going to get it all layed out and maybe put together my next long off..
|
#6
|
|||
|
|||
https://shop.sommercable.com/en/Conn...I-J63MA05.htmlThese look good:
__________________
Rick Yamaha MIJ CJX32 Avalon L32 Avalon A32 Legacy Lowden 022 Gibson J-185 Takamine TNV360sc Cole Clark Fat Lady 3 |