The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > General Acoustic Guitar Discussion

Reply
 
Thread Tools
  #1  
Old 09-20-2021, 04:03 PM
Ralph124C41 Ralph124C41 is offline
Registered User
 
Join Date: Feb 2016
Location: Southern Tier, New York
Posts: 1,647
Default Cutting into a Martin makes me ask about what is Martin HPL

First I have to confess I found out about a video on another guitar forum. In the video a Martin 000-X2 is cut in half to show the interior construction. But after watching the video, I have one major question..

1) The Youtube reviewer says the HPL back and sides are "AKA plastic or essentially plastic." Is that right?

The reviewer also on Youtube answers a question from somebody by saying, "It’s (talking about HPL) just solid plastic now. Not sure it was ever anything different."

I doubted his answer. But then I went to the following site ... and now I still don't really know what Martin HPL ... not the HPL used in construction ... is actually made of, but it does sound as if the wood percentage is very little.

In fact, one sentence on this page cites "

"Also, by adding some sawdust filler, he (American chemist, Leo Baekeland in 1896) obtained a plastic material with a very deep color. In 1907, he was named after his own name Bakelite, and he applied for and patented it. This is the predecessor of today’s high-pressure laminated decorative panel HPL."

and a later passage cites the "plasticity" of the material.

"Finally, in the 1950s, based on previous research by scientists, modern HPL materials were first commercialized in the United States. This material is very revolutionary, it is different from traditional composite panels, and some other materials. Its plasticity and insulation make it a wider range of applications;"

The article is
https://martinguitarsstore.com/what-...martin-guitar/

It just makes me wonder what Martin HPL is actually. Is it more closely akin to plastic than I thought? And ... does it really make a difference?

Oh, yes the video:

It's on Youtube. I keep forgetting the rules here. Can I post it or just give directions or what? The guitar company is not a sponsor here.
__________________
Martin X1-DE
Epiphone AJ500MSN
Alvarez AD30
Alvarez AJ80
Alvarez AD710
Alvarez RD20S
Esteban American Legacy
Rogue mandolin
Reply With Quote
  #2  
Old 09-20-2021, 04:34 PM
Godfather's Avatar
Godfather Godfather is online now
Charter Member
 
Join Date: Dec 2011
Location: Cadillac MI
Posts: 2,198
Default

After contacting Martin about the possibility of selling them wood veneer for their High Pressure Laminate (HPL*) guitars, and the reply I received, I believe it to be an all plastic/non wood material…..but it was not specifically quoted as such. It was a vague reply indeed.

*The one HPL guitar I recently played did not sound bad. YMMV
Reply With Quote
  #3  
Old 09-20-2021, 04:52 PM
Brick is Red Brick is Red is offline
Registered User
 
Join Date: Jun 2014
Location: Maryland
Posts: 601
Default

A link to at least one of the other two videos in their new series appeared in a thread or two here.

If you’re trying to ascertain whether the HPL on Martin X series guitars is laminated wood: No, it is not. Is Martin’s HPL wood? No, it is not. It is what Martin and the countertop makers say it is.

Good to know there’s a new video in this series to watch later.

Last edited by Brick is Red; 09-20-2021 at 04:58 PM.
Reply With Quote
  #4  
Old 09-20-2021, 04:58 PM
printer2 printer2 is offline
Registered User
 
Join Date: Dec 2012
Posts: 4,396
Default

There are carbon composite guitars. The HPL lives in that arena. Is it the same thing as your plastic cup? No. Does it sound good to you? That is the main question (Says a guy wit too much wood in the basement.)
__________________
Fred
Reply With Quote
  #5  
Old 09-20-2021, 05:09 PM
Rudy4 Rudy4 is offline
Registered User
 
Join Date: Oct 2012
Posts: 4,814
Default

If you want to know more about HPL you'll be better served by looking for information about countertop laminate such as Formica or Wilsonart material.

You can turn standard countertop laminate over and the backside offers a fairly attractive alternative for instrument body material. I've actually used it for fret board top surface and it performs well. It just doesn't look great IMHO.

What it is and how it's made:

https://www.compositepanel.org/produ...ure-laminates/

Last edited by Rudy4; 09-21-2021 at 06:30 AM.
Reply With Quote
  #6  
Old 09-20-2021, 05:09 PM
Brucebubs's Avatar
Brucebubs Brucebubs is offline
Charter Member
 
Join Date: Jan 2013
Location: Eden, Australia
Posts: 16,193
Default

The sawdust from D-28's and D-18's is mixed together with adhesive under high pressure to produce 'mahogwood' or 'rosegany' ... or HPL for short.

Typically HPL will produce the scooped mids of rosewood and the scooped high and low ends of mahogany.
__________________
Brucebubs

1972 - Takamine D-70
1980 - Morris B-50
2002 - Guild F-412
2014 - Alvarez ABT60 Baritone
2015 - Kittis RBJ-195 Jumbo
2012 - Dan Dubowski#61
2012 - Epiphone EJ-200/N
2018 - Rickenbacker 4003 Fireglo
2020 - Gibson Custom Shop Historic 1957 SJ-200
2021 - Epiphone 'IBG' Hummingbird
Reply With Quote
  #7  
Old 09-20-2021, 05:56 PM
sstaylor58 sstaylor58 is offline
Charter Member
 
Join Date: Mar 2011
Location: Ithaca, NY
Posts: 742
Default

Quote:
Originally Posted by Brucebubs View Post
The sawdust from D-28's and D-18's is mixed together with adhesive under high pressure to produce 'mahogwood' or 'rosegany' ... or HPL for short.

Typically HPL will produce the scooped mids of rosewood and the scooped high and low ends of mahogany.
Now that is funny!
__________________
---------------------------------
Taylor 314ce
Taylor GS Mini Mahogany
Alvarez AF66CESHB
Yamaha FSX730SC
Yamaha FSX800C
Reply With Quote
  #8  
Old 09-20-2021, 06:06 PM
Ralph124C41 Ralph124C41 is offline
Registered User
 
Join Date: Feb 2016
Location: Southern Tier, New York
Posts: 1,647
Default

Btw, the video reviewer gave "grades" for different categories, such as just a 5 out of 10 for sound. But for interior construction he gave a 9 or a 10 and for construction elements such as resistance to cracks etc, he gave I think something like 47 out of 50.

Still, the O.D. part of me wants to know what Martin HPL actually is. As I said, that link I provided to "clear up" the confusion only made me think Martin HPL is plastic, or more plastic than I thought. (It's a Soylent Green moment to me.)

But as others have said ... so what? It works. I know it's not solid wood. I know it's not layered wood (like in Seagull guitars). I know it's not what I think of laminated wood generally is, that is bands or strips of wood all glued and pressed together.
__________________
Martin X1-DE
Epiphone AJ500MSN
Alvarez AD30
Alvarez AJ80
Alvarez AD710
Alvarez RD20S
Esteban American Legacy
Rogue mandolin
Reply With Quote
  #9  
Old 09-21-2021, 12:25 AM
Jimi2 Jimi2 is online now
Charter Member
 
Join Date: Dec 2017
Posts: 505
Default

I had a chance to play a Martin X series all HPL recently - was interested in having a guitar that wouldn’t be susceptible to humidity changes that doesn’t carry the cost of carbon fiber. It was one of the OM size ones at guitar center, and it really didn’t sound that bad. I couldn’t quite get over the the weird, plasticky feel though. Maybe I could get used to it.
Reply With Quote
  #10  
Old 09-21-2021, 03:48 AM
AndrewG AndrewG is offline
Registered User
 
Join Date: Dec 2004
Location: Exeter, UK
Posts: 7,575
Default

Formica? It's a layered fusion of Kraft paper and phenolic resin-essentially the same as Bakelite. Just guessing as Martin don't specify the source.
https://umgf.com/viewtopic.php?p=2595837#p2595837
__________________
Faith Mars FRMG
Faith Neptune FKN
Epiphone Masterbilt Texan
Reply With Quote
  #11  
Old 09-21-2021, 04:17 AM
Silly Moustache Silly Moustache is offline
Charter Member
 
Join Date: Apr 2006
Location: UK/EU
Posts: 18,801
Default

HPL ?

AndrewG is a former chemist and tends to understand such things far better than I , but I thought I'd add this :

https://plasticsheetsshop.co.uk/what-is-hpl/
__________________
Silly Moustache,
Elderly singer, guitarist, dobrolist and mandolinist.
I'm here to help and advise only

By request, I offer one to one lessons/meetings/mentoring via Zoom! See: https://www.acousticguitarforum.com/...d.php?t=589058

https://www.youtube.com/user/SillyMoustache/videos
Reply With Quote
  #12  
Old 09-21-2021, 06:27 AM
John Arnold John Arnold is offline
Registered User
 
Join Date: Jan 2009
Posts: 3,493
Default

When I first heard that Martin was making Formica guitars, I cringed. For a few years in the early-1980's, I was in the business of cabinetmaking, including fabricating counter tops faced with Formica or Wilsonart. The material is super hard and durable (when glued to a solid surface), and can be obtained in an almost endless array of colors and patterns, many of which imitate wood or stone.
BUT....
This material was never engineered to be used as a structural element. It is brittle, and hard to glue with anything other than a rubbery contact cement, CA glue, or epoxy. To the best of my knowledge, Martin is not using those glues to assemble the bodies, though they may have used CA to attach the bridges on those ill-conceived models with Formica soundboards.
I have repaired Formica Martins with loose braces, and I currently have one in the shop that was dropped, causing the seams to separate. The glue appears to be some kind of wood glue, which is not suitable for a nonporous surface.

Phenolic resin, paper, and a photograph of a natural material. Zero wood content.

These guitars are all about reducing labor cost, since there is no finishing required.

The sound of the guitars is IMHO overly bassy, due to the high density of the material. The only reason the guitars do not weigh a ton is because Formica is less than half the thickness of a normal wood guitar.
Thin + brittle = bad combination.
Reply With Quote
  #13  
Old 09-21-2021, 07:38 AM
Gdjjr Gdjjr is offline
Registered User
 
Join Date: May 2020
Location: Texas
Posts: 911
Default

This is a touchy subject- and somewhat political, so I won't go there- but- sustainability is what substitute woods are all about. A part of Martin's creed is now sustainability- as a leading manufacturer they are, well, leading, with what they currently believe to be the most cost effective substitute- I bet they and others are constantly experimenting with other than wood substances- they are the future, get used to it.
__________________
SO MANY GUITARS/SONGS, SO LITTLE TIME

My Youtube channel

"I" will survive

K.I.S.S.

Current favorites in my guitarsenal. (subject to change )

LAG T118 ACE
LAG T70A
Martin 00017
Martin 0015M
Orangewood Ava (acoustic only with Torriefied spruce top)
Gretsch 5420 (Alpine Green)
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > General Acoustic Guitar Discussion

Thread Tools





All times are GMT -6. The time now is 10:59 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright ©2000 - 2021, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=