![]() |
#16
|
|||
|
|||
![]() Quote:
Over time, I thinned down the herd to only my McPherson Touring... but his instruments are second to none in terms of sound and innovation.... best of luck... these are great instruments! |
#17
|
|||
|
|||
![]()
A beatiful instrument for sure. I'm curious if CF guitars "open -up" like a traditional guitar or not? Any comment appreciated. I'm looking to enter the market and weighing new vs used.
|
#18
|
|||
|
|||
![]() Quote:
![]() Ekoa is a fairly new material, about 10 years old, so a bit early to be certain of its long term durability. It’s made of linen/flax which is an hydrophilic material. It’s probably a bit more sensitive to humidity variations, but once mixed with resin stability is very similar to carbon fiber under standard conditions (non-professional opinion based on my experience ![]() |
#19
|
|||
|
|||
![]() Quote:
![]() I've had a Rainsong all-weave WS-1000 Classic bought new in 2001 and cannot perceive any difference at all in the 22 years since purchase. Not in tone or neck angle or setup. Mine has seen temps during travel in light airplanes at -40°F in Alaska and played at festivals at 105°F in Idaho. The only thing that ever changes is maybe the tuning drifts a bit from A440. The guitar usually stays in tune with itself, but not necessarily to absolute pitch, which varies a little with temperature. I also own a 2017 Blackbird Farallon tenor ukulele made from ekoa, and have not noticed any change with it. According to a recent thread here Blackbird says that ekoa should not be exposed to temps above 120°F so that leaves out those summertime Death Valley gigs. |