#1
|
|||
|
|||
Seagull S6 Classic Finish
]I recently purchased a Seagull S6 Classic that had 2 top cracks repaired, and had a significant ding near the cracks. I followed Mirwa's DIY steaming out ding instructions which worked great. There was a small dent left, and I used Gluboost Fill n Finish to fill it, and an noticeable area where the cracks were repaired. I worked to make the damage almost undetectable except for the finish which is a satin finish. I am including before and after photos, and would like advice on making the finish less blotchy. Thanks
Clifford This is the way guitar looked when I received it: [IMG][/IMG] This photo is after Gluboost repair: This is the photo of the blotchy finish: [IMG][/IMG]
__________________
Recording King RD-318 Bedell TBAC-28-SB Jeff "Skunk" Baxter Last edited by Southern Cross; 05-14-2019 at 07:26 AM. |
#2
|
|||
|
|||
I don’t know what happened to my photos, but will repost them.
__________________
Recording King RD-318 Bedell TBAC-28-SB Jeff "Skunk" Baxter |
#3
|
|||
|
|||
Photos Fixed
I am sorry for the problem with the photos, and I hope now someone can give me some advice.
Clifford
__________________
Recording King RD-318 Bedell TBAC-28-SB Jeff "Skunk" Baxter |
#4
|
|||
|
|||
Does anyone have advice for repairing a satin finish? Please see my last photo of the way a Seagull looks that I used Gluboost Fill n Finish on. Thanks
Clifford
__________________
Recording King RD-318 Bedell TBAC-28-SB Jeff "Skunk" Baxter |