#1
|
|||
|
|||
Used Emerald X20
Just took delivery of a 2018 Cocobolo X20. I live in Florida and wanted an outdoor (hot, humid) guitar. I will almost never play it unamplified. I gambled on a used one. I was shocked at the unamplified sound. It’s really good. Better than my Martin, better than my Yairi, better than a local custom. Way better than my overhead carbon travel guitar. A tweak of the truss rod was all that was needed. Amplified, with Baggs element is just OK. I have an Anthem SL in a box that I might try. I see posts of a few folks using that system. Has anybody swapped an Element for the Anthem SL....and noticed a big improvement?
|
#2
|
||||
|
||||
Congrats on a wonderful guitar. I have one just like yours from 2017 and it still impresses. Mine has the Regular element and yes it's just ok through most amps/PA's. My friend has the exact same guitar only with the Anthem SL and it's an improvement for sure. It's output is not stellar but more natural from the git-go for sure. He did not install this himself as he ordered it that way. Mine was really for sitting out and grabbing to play and really not for plugging in but I wanted something in it just in case I wanted to.
I hope someone will direct you if it's worth the add.
__________________
Emerald X20 Cocobolo Woody Emerald X20 Opus 6 String Baritone Iris ND-200 Hand Painted By Sarah Ryan Iris Smeck Slope Shoulder Dread Iris AB Model Many Takamine Pro series Godin A8 Mandolin |
#3
|
|||
|
|||
Thanks. It’s not a huge deal to put the Anthem in there....all the holes are drilled already. Sounds silly, but Emerald used stick on cable guides with zip ties around the cables. So...I can try to cut those cable ties without cutting the pickup leads, or I can pry the stick-on guides loose. I realize this is a “first world” problem, but I don’t want to bother if the Anthem is not a big improvement. As is, it is bass heavy, with more quack than i like. With my own mixer, I can EQ it to a more acceptable sound. Plugged into the local festival or bar’s PA is another sound altogether.
|
#4
|
|||
|
|||
I would expect that SL to be a huge upgrade in the plugged-in sound with minimal fuss.
__________________
enough instruments to be mediocre at all of them |
#5
|
|||
|
|||
Quote:
I just want to add that I’ve had a lot of Baggs pickups and I’m a big fan of most of them, but just by chance when I bought the X30 it had a K&K Mini installed that he ordered when he spec’d it with Emerald. I was shocked at how good it sounds in that guitar, running through my Baggs DI. Just wanted to throw that out there.
__________________
McCollum Grand Auditorum Euro Spruce/Brazilian PRS Hollowbody Spruce PRS SC58 Giffin Vikta Gibson Custom Shop ES 335 '59 Historic RI ‘91 Les Paul Standard ‘52 AVRI Tele - Richie Baxt build Fender American Deluxe Tele Fender Fat Strat |
#6
|
|||
|
|||
Thanks...happy to provide a chuckle. If the X20 didn’t sound so exceptional unplugged, I would probably be fine with the Element pickup that’s in it. But you notice what is missing. I installed a K&K in my Yairi, and it is OK, though I run it straight into the mixer, then to PA. Maybe I’m hopelessly trying to avoid a DI in the chain.
|
#7
|
|||
|
|||
Quote:
__________________
McCollum Grand Auditorum Euro Spruce/Brazilian PRS Hollowbody Spruce PRS SC58 Giffin Vikta Gibson Custom Shop ES 335 '59 Historic RI ‘91 Les Paul Standard ‘52 AVRI Tele - Richie Baxt build Fender American Deluxe Tele Fender Fat Strat |
#8
|
|||
|
|||
You may also want to try a LR Baggs VoicePrint pedal or ToneDexter pedal before changing the pickup. I have an Emerald X20 & X30 and both sound fantastic through the Baggs VoicePrint.
__________________
Bill Coplin Nashville, TN ————————- 1983 Yairi DY85a Composite Acoustics GX Composite Acoustics Cargo Emerald X-20 Opus Red Emerald X-30 Padauk Gibson ES-339 PRS SE Hollow Body II Piezo Fender FSR Telecaster Godin Exit 22 with Fishman TriplePlay MIDI Ibanez Mikro Bass Vintage V74 Icon Fretless Jazz Bass Spector Timbre Jr. Acoustic Bass |
#9
|
|||
|
|||
I think any quality DI will help a UST type pickup. But the VoicePrint and ToneDexter are sooo cool.
|
#10
|
|||
|
|||
Before I installed another pickup, or bought a $400 box....I though I better check that UST. Well...it was not in the correct placement. It did not even extend to the treble “e” string. Once placed to specs, the string balance improved dramatically, duh. Far less booming bass now, and go figure, those higher frequencies are now more pronounced. I guess my eagerness to string it up and play it got the better of me. Now to play it the way it is for bit before I jump off a cliff to change pickups, strings, voiceprint it. Thanks for the suggestions, I may still use them.
|
#11
|
|||
|
|||
I purchased a used unamplified 2017 X20. I added the Anthem. I had to drill for the output but that was not a problem. I roughed the area for the microphone and attached it without a problem. The sound is GREAT! An Anthem will be a great choice.
__________________
Taylor V-Class 814ce, 717e BE WHB, 520ce, 454ce, 420 Cedar\Maple, T5z Classic Martin D18E Retro Cordoba C10 Crossover Emerald X20 Rainsong H-OM1000N2 Voyage-Air VAD-04 Custom Les Paul Hot Rod Deville 410, Fishman Loudbox Performer |
#12
|
|||
|
|||
Quote:
Only thing I don't like about the K&K I have in the Rainsong. Never know if you are going to need the DI for the house system, so I always have to lug it around anyway.
__________________
Larrivee OM-03RE; O-01 Martin D-35; Guild F-212; Tacoma Roadking Breedlove American Series C20/SR Rainsong SFTA-FLE; WS3000; CH-PA Taylor GA3-12, Guild F-212 https://markhorning.bandcamp.com/music |
#13
|
|||
|
|||
Thanks for all the suggestions.. I did a pickup transplant today. Out came the element and in went the Anthem SL. Very happy with the Anthem SL. Even with help from LRBaggs support, I could not get rid of the booming bass with the Element. Even though the UST is the same between the two pickups, the Anthem is fine.
|