#1
|
|||
|
|||
Technical Advice Needed
Hi, I plan to run a Martin OMJM (with factory active Fishman pickup) directly into a LR Baggs Para Acoustic DI. From there I plan to run XLR out of the PADI into the PA. Are there any obvious input impedance mis-matches with this combination?
I ask because in the past when I used a k&k mini with the PADI there was an issue that i solved by plugging inserting a boss pedal into the chain right before the PADI. Thanks |
#2
|
|||
|
|||
The Fishman being active can drive anything. It will work fine.
__________________
jf45ir Free DIY Acoustic Guitar IR Generator .wav file, 30 seconds, pickup left, mic right, open position strumming best...send to direct email below I'll send you 100/0, 75/25, 50/50 & 0/100 IR/Bypass IRs IR Demo, read the description too: https://youtu.be/SELEE4yugjE My duo's website and my email... [email protected] Jon Fields |
#3
|
|||
|
|||
Thank You JF
|