Boss AD10

[shufflebeat]

Originally Posted by Joe.Manganese

…The problem was the sound.
When I was plugging into the PA or into a Fishman amp (to test as well), something was not OK. Musicians were saying the sound was not good, plain and simple.

Following with interest. Can you be more specific?

[MadMike62]

Originally Posted by BlueStarfish

If you run everything flat and turn off all the Fx, no coloration at all. The signal processing is 100% digital so it’s like listening to a CD through a high end sound system. The manual doesn’t give an AD/DA spec but it sounds flat and pristine to me, so I’m assuming it’s 24bit/96khz internally if not better.

Now, you still have to get the levels and gain structure right all the way through your signal chain. If you don’t, you’ll get some combination of noise and / or that shrill “gain too high” sound. Just like every other preamp. But if you set the gain structure appropriately, it should be whisper quiet and flat.

Thx.

Just rented one for 30 days from a local store. My guitars sound much more natural through it. More to come.