The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Reply
 
Thread Tools
  #1  
Old 02-17-2019, 06:40 AM
philphlash philphlash is offline
Registered User
 
Join Date: May 2013
Posts: 11
Default Bridge Replacement 1952 Martin 5-18 Terz

Could any of you experts ballpark a replacement bridge (Mine Split) on a 1952 Martin 5-18 terz guitar.
Removing old bridge
Fabricating new bridge
Gluing New bridge
New Saddle and setup
Much Thanks in Advance
Reply With Quote
  #2  
Old 02-17-2019, 09:49 AM
JonWint JonWint is offline
Registered User
 
Join Date: Mar 2016
Location: 1 hr from Nazareth
Posts: 340
Default

I'm not an expert, but an expert might be able to repair the bridge rather than replace it.

Post a photo if you want an informed recommendation.
Reply With Quote
  #3  
Old 02-18-2019, 05:25 AM
B. Howard's Avatar
B. Howard B. Howard is offline
AGF Sponsor
 
Join Date: Aug 2013
Location: Magnolia DE
Posts: 661
Default

Repairing the bridge if at all possible would be best from a preservation standpoint as well as value after the repair. A replacement bridge will likely affect the value a fair bit.

There may be damage inside to the bridge plate from the string balls that caused the bridge to split as this is a common cause so repairs may be a bit more extensive than you think.

Price for the services you have listed will also depend on the material used for the new bridge. in standard IRW something like this would cost around $250 here. If you want BRW as the original probably is the cost may double....

Then there is the issue of neck angle. You may well find that the neck needs re-set to actually fit a new bridge of the correct thickness with the correct saddle height above it.

In reality this will most likely turn out to be a lot more than just the bridge replacement and going worst case scenario where we need to replace the bridge plate, repair the top between the plate and the bridge, neck re-set , a level crown and polish of the frets and a new bone nut you would be looking at closer to $1000.
__________________
Brian Howard
Professional Luthier
Magnolia DE

Brian Howard Guitars
Brian Howard's Guitar Building and Repair Blog
My Facebook Page
Reply With Quote
  #4  
Old 02-18-2019, 05:35 AM
nickv6 nickv6 is offline
Charter Member
 
Join Date: Apr 2008
Posts: 130
Default

I've known three terz guitars needing bridge repairs.
The cause can be the top crowning, putting alot of stress on the bridge which is covering a larger portion of the soundboard than on a bigger guitar.
So it's worth taking a careful look at the top too.
Nick
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Thread Tools



All times are GMT -6. The time now is 04:16 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2000 - 2018, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=