#166
|
|||
|
|||
I'm sure someone has tried this but I can't find anything on it. Has there ever been an x brace used on a violin leaving no need for a sound post?
|
#167
|
||||
|
||||
People have tried just about anything you can think of. Because the bow gives constant power input, unlike a plucked string, the positive connection to the back that the sound post provides is a wonderful thing. As with acoustic guitars, but more so with the violin, the back is the key to great tone IMO.
|
#168
|
|||
|
|||
That's what I was thinking. Thanks Bruce!
|
#169
|
||||
|
||||
Today I sprayed what I expect to be the final coat of Varnish on the JZ-16. Picture would look much the same as the first coat, so more on that when i put it together in a couple of weeks.
I also closed the violin this morning, and this afternoon I have gotten about halfway though the channel process on the back. This is where much of the magic happens in a carved instrument as it releases the back to be able to resonate with the top. I am taking the edges of the back down to around 2mm from the roughly 3.5 mm they were when I glued it to the ribs. Firt I use a gouge, and them fair it together with a variety of scrapers. Here's the label, the last thing before closing: This is as good a time as any to admit that I have made a creative ff hole for a violin. But I have a friend with a Tony Lane violin that has such liberties, and it sounds great to me. Here in the bass bar on the inside of the top: And, here are the channel gouged in the bass half of the back, being close to faired on the treble side: |
#170
|
|||
|
|||
Very interesting work, Bruce. I can see you're really starting to have some fun in your "retirement"!
|
#171
|
||||
|
||||
I really like those scrappers Bruce...
__________________
A bunch of nice archtops, flattops, a gypsy & nylon strings… |
#172
|
||||
|
||||
I hope you mean scrapers, Bob, but there IS always that danger . . .
I have got the body of this "violin" as close to right as I currently know how to do, so it's on to the neck. |
#173
|
|||
|
|||
Looks cool.
|
#174
|
||||
|
||||
Hah!!! Not a chance of that...
__________________
A bunch of nice archtops, flattops, a gypsy & nylon strings… |
#175
|
||||
|
||||
I have finished the major woodwork on the violin, and here it is with my secret Cremonese pre-ground freshly applied.
|
#176
|
||||
|
||||
Good News!
The carved instrument distraction is about to stop!!! As you've surely noticed, when one goes into finish , I start another, and the violin has gone into finish.
The bad news, however, is that it is going to be a classical guitar. I have made three, and the last was for Duck Baker, more of a modern flamenco/Jazz guitar, really, but it looked like a classical and did have nylon strings. Incidentally, I thought it worked very well, particularly for Duck's style. This will be a true Classical to the best of my ability. I have been thinking about this guitar for some time, and I will start it in a day or two, most likely. Here is the first coat of varnish on the violin: |
#177
|
||||
|
||||
Love dat finish (wonder why...)
I look forward to seeing you apply your lutherie skills ata classical. So much of your steel string method is ground in that tradirion.
__________________
A bunch of nice archtops, flattops, a gypsy & nylon strings… |
#178
|
||||
|
||||
Pretty impressive to watch it take shape. I have always liked your finishes, Bruce. Both visually and functionally.
__________________
Circa OM-30/34 (Adi/Mad) | 000-12 (Ger/Maple) | OM-28 (Adi/Brz) | OM-18/21 (Adi/Hog) | OM-42 (Adi/Braz) Fairbanks SJ (Adi/Hog) | Schoenberg/Klepper 000-12c (Adi/Hog) | LeGeyt CLM (Swiss/Amzn) | LeGeyt CLM (Carp/Koa) Brondel A-2 (Carp/Mad) |
#179
|
||||
|
||||
Bruce, I like that you made your own purfling. At least it looks like the same material that appears on your guitars. And those inlaid "notches"!
Steve |
#180
|
||||
|
||||
Yep, same purfling as my guitars!
Getting back to the FT-15-D (mini-D) you may recall, which has had weeks of curing time: |