|
|
#1
09-02-2005, 08:26 PM
|
|||
|
|||
where to put tuner
Hey everyone I just bought a TU-2 stomp tuner, and I'm not sure where to put it in my line...I have a PADI...should I put it in my effects loop with my effects pedals or should I go guitar to tuner to padi?? I want the bypass function so I'm not interested in putting it in my line out of the padi cause I know a lot of you guys feel that's the only place tuners should go...away from the main line
 lemme hear your suggestions...need to know how to set up for worship this week.
__________________
Mark Rainsong WS1000 Taylor "T6" Custom w/added element UST USA Tele Deluxe Ibanex SRX-500 Vox AC-15 Korg Pitch Black (2x), Fishman Aura 16, BBE Sonic Stomp, LR Baggs PADI, Boss TU-2, Sansamp Tech21 Bass Driver, Boss GE-7 Bass EQ, MXR Micro Amp, Keely BD-2, Fulltone OCD, Fulltone Fulldrive 2 Mosfet, Boss DD-20, BBE supacharger Up next: Empress EQ, Radial J48 
|
|
#4
09-03-2005, 02:58 AM
|
|||
|
|||
|
take the tuner away from the main line. TU-2 is NOT a true bypass tuner pedal. the only tuner pedal that is true bypass is the peterson strobostomp. If you have a volume pedal put it on the tuner out if not put it with your effects pedals.
__________________
'03 314ce Koa-LTD '05 Tom Anderson Quilted Crowdster in Desert Sunset Finish '05 MTD Kingston Heir 5 '06 Bourgeois Signature D Adi/Brazilian
|
|
#5
09-03-2005, 09:48 AM
|
|||
|
|||
|
Run it from a seperate output of the PADI. Putting it in-line adds links to a chain you want to keep as short as possible.
__________________
"There's no such thing as still life" Gerald Sheppard x 1 McPherson x 1 Froggy Bottom x 3 Goodall x 2 Cp Thonton Classic Cp Thornton Elite Cp Thornton Blues Queen Cp Thornto Legend Special
|
|
#6
09-03-2005, 11:29 AM
|
|||
|
|||
|
Definitely not between the guitar and the PADI!
Your guitar should be loaded by the highest impedance link in your signal chain. This will insure that the very low level signal coming from your instrument is passed on to the PADI preamp as cleanly as possible. First choice would be to connect your TU2 in-line between the output and your amp. Second choice would be to connect it as the first device in your effects loop chain. Ron
|
