#16
|
|||
|
|||
It does not happen on mine.
Ll.
__________________
Martin OM-28 1931 Authentic | Martin CEO-7 Taylor GS Mini Mahogany | Logan Custom Telecaster |
#17
|
|||
|
|||
My thought as well. I have own so many Martins, this has not happened to me, yet.
|
#18
|
|||
|
|||
Quote:
Martin is infamous for beveling their fret ends too aggressively since the switch to the "bound" appearing fretboard and PA taper. (Bevelling is done by hand whereas nuts are cut by the plek machine, which is why it’s an intermittent problem only on some guitars.). This has been talked about over on the UMGF. As people have said, a new nut with narrower slots might get that string back over the fretboard just enough to fix the problem. But if the nut is to spec, the actual problem is the fret ends. You should also note that narrower nut slots will give you diminishing returns the farther up the neck you go (ie will make a more noticeable difference in the first position vs up the neck). Last edited by zoopeda; 12-15-2019 at 05:58 PM. |