#1
|
|||
|
|||
OK to swap in heavier high E string in vintage Höfner?
Dear all,
I have a lovely ‘50s Höfner archtop. The neck is fairly big, no truss-rod. I use VHS vintage bronze, .12-.54 but today at string change I put in a .14 high E. Do you think this might entail some dangers for the neck? Thanks in advance! |
#2
|
|||
|
|||
I've seen only a few old Hofner arch tops but they were built like tanks. Of course every guitar is different and has had it's own unique history. But you should keep an eye on it.
|
#3
|
|||
|
|||
Just watch what the neck does, but it really shouldn’t be any problem. The guitar probably had considerably heavier strings on it originally.
whm |
#4
|
|||
|
|||
somewhat related: I was watching some Mark O'Connor videos and read this blurb on one of them that he had posted:
"I fell in love with my new John Baxendale guitar - a beast of a box. Man I love that dreadnought sound! It is strung with the heaviest guage of strings available from D'Addario (0.14 thru 0.59). And this heavy, thick pick from Blue Chip, is the weight #55, it can't bend and can really produce tone." I'll bet he's got one heck of a handshake!
__________________
______________ ---Tom H --- |
#5
|
|||
|
|||
Quote:
I am not worried by the gauge per se. I guess the thing that worries me is somehow upsetting the supposedly perfect balance of the string set by swapping a heavier one at one extreme, and thus subjecting the neck to an asymmetrical pull that could do damage. I’m almost sure it’s silly… and I’m sure some knowledgeable member can take away the “almost” (or persuade me to put a .12 back there!). It’s a guitar I love quite a lot. |
#6
|
|||
|
|||
Dont worry about uneven tension, If anything your evening it. Bass strings usually have slightly more tension than the trebles. Daddario has charts you could look at for reference, but I'm guessing your only adding a few pounds of tension.
__________________
Tom 2016 Bourgeois OM SS (Addy/Maddy/Hide) 2010 Martin D-28 1968 Yamaha FG-180 |
#7
|
|||
|
|||
Thanks a lot gentlemen!
|
#8
|
|||
|
|||
Quote:
I put medium gauge on all my archtops. (56-13) Incidentally a 12 on a 25" scale is about 24.7 lbs tension, and a 14 would be 33.6lbs i.e about an extra 9 lbs give or take.
__________________
Silly Moustache, Just an old Limey acoustic guitarist, Dobrolist, mandolier and singer. I'm here to try to help and advise and I offer one to one lessons/meetings/mentoring via Zoom! |
#9
|
|||
|
|||
Thanks for the reply. As to why, I am embarrassed to say that I could not have the .12 string from the pack hold firm on the tuning peg for the life of me. So I grabbed the first string that came within reach (a .14) just to test locking methods on a fresh one. Not only it stayed in tune better, but then I noticed that there was even a slight improvement in string-to-string balance through the DeArmond pickup fitted on that guitar.
|
#10
|
|||
|
|||
Mid 50's hofners have a few issues, but neck strength is not notably one of them. I strongly suspect they have a steel truss rod buried in there. They do have a plain tenon neck joint is is quite prone to quietly slipping and sliding away, under string tension, so the only remedy is a simple neck reset. Mine was done 35 years ago. The other issue is hydrogen embrittlement in the chromed Frequensator tailpiece lets the string hook break off, PITA and almost impossible to repair. I have a 1957 Hofner Senator.
__________________
Brian Evans Around 15 archtops, electrics, resonators, a lap steel, a uke, a mandolin, some I made, some I bought, some kinda showed up and wouldn't leave. Tatamagouche Nova Scotia. |