|
|
#1
11-10-2014, 06:41 PM
|
|||
|
|||
STUDIO PICTURES Benjamin Paldacci #3 OM: Indian RW Mastergrade/ Sitka Spruce
Hi Everybody,
Here is a new thread about a custom order: OM model, Indian RW and Sitka Spruce. So, I'll make two guitars at the same time (with the black Walnut dread), a first time for me  Model: OM Body Size: OM 14-Fret Top: Mastergrade Sitka Spruce Rosette: African Blackwood segmented Headstock: African Blackwoodd, Figured Redwood, Indian RW Endgraft: Indian RW, Madrone Burl Top Braces: adirondack Spruce Back Braces: Sitka Spruce Back Material: Indian RW Binding: Black Ebony Neck Material: Honduras Mahogany Nut Material: Bone Backplate: Indian RW Fingerboard Material: 1st Grade black ebony Scale Length: 25.34 inches Fret material: Stainless Steel Number Of Frets Clear: 14 Number Of Frets Total: 20 Fretboard radius: 16 inches Fingerboard Binding: Black Ebony Finish: French Polish Bridge Material: Black Ebony Bridge Style: Custom Design Saddle: Bone Tuning Machines: Rubner Tuners       Thank you for your interest! Ben
__________________
Benjamin Paldacci Guitars: "I strive to build my instruments with the finest Tone, Ergonomics & Aesthetics" https://www.benjaminpaldacciguitars.com/ Last edited by BenjaminPaldacci; 06-02-2015 at 10:30 AM. 
|
|
#2
11-10-2014, 07:38 PM
|
|||
|
|||
|
Benjamin Paldacci #4 OM: Indian RW Mastergrade/ Sitka Spruce
Benjamin- It is wonderful to see you back on the AGF, and I look forward to following this build! The materials look fantastic, and I am sure you will give them life in the most tasteful and artistic way.
|
|
#3
11-10-2014, 09:06 PM
|
|||
|
|||
|
Thank you fountainhead, Well I'll try!
In fact, I was on Holiday to see my family in France, that's why I haven't posted some new stuff (but I always taking a look to the awesome builts of the forum) 
__________________
Benjamin Paldacci Guitars: "I strive to build my instruments with the finest Tone, Ergonomics & Aesthetics" https://www.benjaminpaldacciguitars.com/
|
|
#4
11-13-2014, 10:38 AM
|
|||
|
|||
|
Well well... I sanded the back before to joint it and I was not happy about the tap-tone... I took another one and it perfectly fit with the top, with a great sound. I put the older in the pile for a 000 model in the futur!
 The top is ready to be sand and the rosette will come soon!
__________________
Benjamin Paldacci Guitars: "I strive to build my instruments with the finest Tone, Ergonomics & Aesthetics" https://www.benjaminpaldacciguitars.com/
|
|
#5
11-13-2014, 08:21 PM
|
|||
|
|||
   
__________________
Benjamin Paldacci Guitars: "I strive to build my instruments with the finest Tone, Ergonomics & Aesthetics" https://www.benjaminpaldacciguitars.com/
|
|
#6
11-14-2014, 06:28 PM
|
|||
|
|||
|
African Blackwood on quarter for the rosette. My customer want a simple design, "sober-minded"
     
__________________
Benjamin Paldacci Guitars: "I strive to build my instruments with the finest Tone, Ergonomics & Aesthetics" https://www.benjaminpaldacciguitars.com/
|
|
#7
11-14-2014, 06:32 PM
|
|||
|
|||
|
Great looking woods on this, Ben--looking forward to seeing this come together!
__________________
2013 Stehr Auditorium (Carpathian/Myrtle) 2015 Stehr Auditorium (Adi/BRW) 2020 Baranik Meridian (Blue Spruce/Manchinga) 2020 Wilborn Arum (Tunnel 14/Coco) 2021 Kinnaird Graybeard (BC Cedar/Bog Oak) 2022 Kinnaird CS Student Build (Adi/Padauk) 2023 Kinnaird FS (Italian/Koa)
|
|
#8
11-14-2014, 11:33 PM
|
|||
|
|||
|
Thank you for your support Nemoman
It is precious for me to see that my project could be like, it really helps me to be a greater guitarmaker
__________________
Benjamin Paldacci Guitars: "I strive to build my instruments with the finest Tone, Ergonomics & Aesthetics" https://www.benjaminpaldacciguitars.com/
|
|
#9
11-19-2014, 09:32 PM
|
|||
|
|||
     
__________________
Benjamin Paldacci Guitars: "I strive to build my instruments with the finest Tone, Ergonomics & Aesthetics" https://www.benjaminpaldacciguitars.com/
|
|
#10
11-21-2014, 01:57 PM
|
|||
|
|||
     
__________________
Benjamin Paldacci Guitars: "I strive to build my instruments with the finest Tone, Ergonomics & Aesthetics" https://www.benjaminpaldacciguitars.com/
|
|
#11
11-22-2014, 11:39 AM
|
|||
|
|||
|
The top and the back have the good thickness, the rosette is done!
    
__________________
Benjamin Paldacci Guitars: "I strive to build my instruments with the finest Tone, Ergonomics & Aesthetics" https://www.benjaminpaldacciguitars.com/
|
|
#12
11-26-2014, 02:17 AM
|
|||
|
|||
    
__________________
Benjamin Paldacci Guitars: "I strive to build my instruments with the finest Tone, Ergonomics & Aesthetics" https://www.benjaminpaldacciguitars.com/
|
|
#13
12-13-2014, 03:09 AM
|
|||
|
|||
    
__________________
Benjamin Paldacci Guitars: "I strive to build my instruments with the finest Tone, Ergonomics & Aesthetics" https://www.benjaminpaldacciguitars.com/
|
|
#14
12-13-2014, 03:10 AM
|
|||
|
|||
     
__________________
Benjamin Paldacci Guitars: "I strive to build my instruments with the finest Tone, Ergonomics & Aesthetics" https://www.benjaminpaldacciguitars.com/
|
|
#15
12-13-2014, 03:52 AM
|
|||
|
|||
|
Very clean work Ben!
|
