|
|
#1
02-24-2020, 07:52 AM
|
|||
|
|||
Fishman Prefix Blender - Anybody replace the mic?
Someone locally is selling an old 614ce with the fishman trap door blender system. I remember when those came out and they sounded great but were so prone to feedback everyone just shoved the slider far left to the UST. I wonder if these days the gooseneck could be replaced with a lyric or something that is better voiced for inside a guitar. Could be a great way to salvage the trap door Taylor's. They are still great guitars!
__________________
1970 Martin D28 1970s Eko Ranger 12 1984 Goodall Rosewood Standard 1990s Hirade K5 1996 Ibanez AG600e 2000s Eastman E10D 2009 Breedlove American 000 MM 2007 Breedlove DR Deluxe Custom 2010s Eastman E10OM SB 
|
|
#2
05-11-2022, 07:26 AM
|
|||
|
|||
|
Swap the mic in Fishman Prefix?
Nobody answered in 7 years? That's a shame.
I have the same, or at least similar concern. Fishman Prefix ust/mic blender barndoor on a 2002 RainSong. ust works fine, mic has no response. Can use as is, but would like to get the mic side working... Suggestions gratefully appreciated!
|
|
#3
05-11-2022, 10:54 AM
|
|||
|
|||
|
Hi,
If I remember correctly there is a little adjustment potentiometer on the circuit board inside that adjusts the mic level. Try finding a pdf of the manual to see what I mean. It’s possible that the pot is dirty and needs a few turns to get it working. Good luck, Stan
|
