#1
|
||||
|
||||
SBT added to Takamine CTP3 Preamp
I posted this in classical since the application was on a Takamine Hybrid. The install was straight forward and yielded good results. I'll add, I used thin double sided foam tape. I'm not over on the AGF much anymore and was just passing back through. If anyone has any detailed questions, my email is: [email protected]
https://www.acousticguitarforum.com/...d.php?t=630634
__________________
Martin 000-28EC, Taylor 12fret Cedar/Mahogany, Taylor GC8, Carvin AC275, Takamine TC135SC, Yamaha APX5na Last edited by Turp; 11-07-2021 at 05:08 PM. |
#2
|
|||
|
|||
This is well timed. I have a K&K twin spot in a mandola connected straight to the output jack into the Tonedexter. There is a preamp fitted from an earlier setup but I've been bypassing that til now.
I've recently started using a wireless setup which upsets the impedance matching so I've been toying with the idea of running the K&K into the preamp first. Thanks for posting, passing stranger.
__________________
Give a man a fishing rod... and he's got the makings of a rudimentary banjo. |
#3
|
||||
|
||||
Love your signature..."Give a man a fishing rod... and he's got the makings of a rudimentary banjo."
__________________
Martin 000-28EC, Taylor 12fret Cedar/Mahogany, Taylor GC8, Carvin AC275, Takamine TC135SC, Yamaha APX5na |
#4
|
|||
|
|||
It's all a matter of priorities.
__________________
Give a man a fishing rod... and he's got the makings of a rudimentary banjo. |