#1
|
|||
|
|||
Unfilled spaces after a refret. Is this normal?
I just got a guitar back from a refret and noticed that there are tiny holes that the new fret's tangs weren't able to fill. It looks a bit odd and was wondering if this is normal or if the guitar tech did a subpar job.
|
#2
|
||||
|
||||
Picture, pleazy.
Bob
__________________
"It is said, 'Go not to the elves for counsel for they will say both no and yes.' " Frodo Baggins to Gildor Inglorion, The Fellowship of the Ring THE MUSICIAN'S ROOM (my website) |
#3
|
||||
|
||||
I just had a deja vu moment. I swore I read the exact same question (almost word for word) a month ago. Seriously.
__________________
Fazool "The wand chooses the wizard, Mr. Potter" Taylor GC7, GA3-12, SB2-C, SB2-Cp...... Ibanez AVC-11MHx , AC-240 |
#4
|
|||
|
|||
Quote:
|
#5
|
|||
|
|||
Seen from the side, the tang not reaching the bottom of the cut? If the frets are solid, shouldn't they be fine? However, is there a putty that could have been applied to the sides, that would have improved the look of it with just a wee bit extra effort?
|
#6
|
|||
|
|||
The tangs should not reach the bottom of the fret slot, thus the small gap. The gaps can be filled in. Some use burn in lacquer, black or brown to match the FB, others use a combination of glue (i.e. crazy glue) and fine saw dust or pigment to match the board. Crazy glue works well because it has a refractive index similar to that of lacquer. The finish can be touched up and polished.
|
#7
|
|||
|
|||
Linseed oil mixed with wood putty is a good filler that has some flexibility to it.
We use it for filling the gaps around Taylor necks when refitting them, I have also used it on fret edges for a cleaner look. Steve
__________________
Cole Clark Fat Lady Gretsch Electromatic Martin CEO7 Maton Messiah Taylor 814CE |
#8
|
|||
|
|||
Quote:
DIY: Get some wood. Make sanding or filing dust. Use carpenters glue. Make a paste. Fill it in, flatten it. Repeat after dried (probably will be some shrinkage). Clean the next day with COTTON balls (not absorbant puffs) dampened slightly with water. Done!
__________________
---- Ned Milburn NSDCC Master Artisan Dartmouth, Nova Scotia |
#9
|
|||
|
|||
I really don't understand the desire to fill these.
|
#10
|
|||
|
|||
I understand it, it looks awful and I would have to look at it every day. How irritating. The two guitars I have dont show space and the last guitar I sold didnt. I didnt ask for it they just came that way. I assumed that was part of a good job. I wouldnt be taking my guitar back to a place that used that shortcut.
|
#11
|
|||
|
|||
Me neither, but I often see an extreme desire for cosmetic perfection. And to be fair, I've been guilty of it myself times, but I'm getting better! That's not to say we should excuse sloppy workmanship, but I think we misplace priorities. This is a fine example of that sort of fixation on something that shouldn't matter. Just my opinion.
In your case, and mine too but to a lesser degree, you have great vintage instruments pass through your hands. When you find the great ones without significant damage or alterations, an "issue" like the tiny space at the bottom of the fret slots is beyond irrelevant. Additionally, adding finish or something else to fill that space could actually be detrimental to the value of a vintage instrument and add nothing to function. |
#12
|
|||
|
|||
Two words: bound fingerboards.
If one doesn't like a color contrast, use fingerboard binding of the same wood as the fingerboard. Ebony-on-ebony, for example, is nearly invisible. |
#13
|
||||
|
||||
I don’t like the look OR the feel of through frets, especially after the original frets have been replaced. It is much easier to get a clean fill job before the finish is put on. This is much of why I only make bound fingerboards, which are much easier to to do clean refretting in, despite the common practice of charging more for bound fingerboards.
When I do have to refret an unbound fingerboard, I usually use a Moser wax stick to do the fret slot fill. It is very quick, non invasive, and though it seems soft for the job, holds well in the long run and doesn’t make the third refret harder for that eventual technician, so a kindness. |
#14
|
|||
|
|||
Quote:
As a result, I don't routinely fill the slots on the guitars I build or on refrets, unless specifically requested. One exception is when the slots have been deepened too much by previous careless repairmen. |
#15
|
|||
|
|||
My take on it, John...
1) It is ugly. Cosmetics. 2) It allows hand gunk (or beer, or drool, god forbid!!) to get into the fret slot, and it may indeed be a contributing factor to fret ends lifting after some time has transpired. Hence, since it is EASY PEASY to rectify, it is a no-brainer for me to just fill them. And as an aside or as an additional thought... I MUCH prefer bound fingerboards.
__________________
---- Ned Milburn NSDCC Master Artisan Dartmouth, Nova Scotia |