#16
|
|||
|
|||
Quote:
|
#17
|
||||
|
||||
Quote:
|
#18
|
|||
|
|||
The bridge is thin. If you had a bridge that was 0.360", then the saddle height above the bridge would be acceptable. I use 0.360" bridges on my new builds.
|
#19
|
||||
|
||||
Compared to my Martin definitely. I wonder if the straight edge would fall right on top if it were the same size as my Martin bridges?
|
#20
|
|||
|
|||
Quote:
Perhaps. That does sound like a svelte bridge. Plus, I still think it’s a little dry. I do not think it’s an emergency. But, you can have it looked at. Was it sold as brand new? If so, you should have it looked at before your return period expires.
__________________
"Lift your head and smile at trouble. You'll find happiness someday." |
#21
|
||||
|
||||
Quote:
I've spoken with the dealer and he wants me to let the shop take a look and if it needs to be exchanged he will honor it. |
#22
|
|||
|
|||
Quote:
Good move.
__________________
"Lift your head and smile at trouble. You'll find happiness someday." |
#23
|
||||
|
||||
Well I’ve taken it to two different shops. One guy said it could go either way and if I wanted to keep it I should. Another said I should send it back or demand a new proper height bridge be installed. That torque will cause the saddle to lean and eventually the bridge will crack. Problem is this is the only one from dealer so I’d be waiting for who knows how long and it was part of a trade. If it were just a cash deal I’d have gotten a refund and bought one elsewhere. Not sure what I’m gonna do.
|
#24
|
|||
|
|||
Yeah it's a tough call because they both are correct. I've seen bridges like that which have zero problems but then when they do, they do. Now the problem is, will it bother you? If it is going to keep you awake at night then trade it in.
|
#25
|
||||
|
||||
It sounds so dang good and loud. I think I’m going to roll the dice. This thing Is louder and more resonant than my hd28 i think. And that guitar is loud. I’m going to cross my fingers it’s not an issue in the future.
|
#26
|
||||
|
||||
I would talk to your dealer and get in writing that if this guitar has any of the pre-mentioned issues, they will take care of it, and keep the guitar. This issue comes down to the design and build quality of the guitar. Top thickness, bridge plate thickness and footprint, bracing pattern placement, thickness, and quality, all come into play, as well as bridge thickness, saddle thickness, wood stiffness, and how close the saddle is to the front of the bridge. A visit to any guitar shop that has a decent supply of older, quality used guitars will prove that many older guitars could benefit from a neck reset. The amount of older guitars that have 1/32"-1/16" of saddle exposed and have high action is amazing and disappointing in my opinion. All of the many quality guitars I have owned over the years have needed the saddle lowered a couple times over the years as the body/neck settle in. I like to see a tall saddle in a new guitar, so that after a few years and a few saddle adjustments, there is still decent saddle height with good action. I lobby for a slight neck over set.
__________________
http://www.krausguitars.com |