#16
|
|||
|
|||
The PM10A is designed to stand alone as a powered full range sound reinforcement loudspeaker for small systems. The PM10A can be laid on it's side for a 60 degree angled stage monitor. Coupling the PM10A with a subwoofer such as the LS1501 results in an ideal three way system with extended low end. Effective for both portable and permanent applications, featuring a 1-3/8" pole mount cup. Applications include:
- DJ system - House of Worship - Band PA - Satellite system - Standalone 3-Channel System The PM10A incorporates premium components housed in a rugged water resistant enclosure, designed for crystal clear sound in small to medium size venues. The high power drivers feature large magnet structures for high efficiency producing more output per watt than systems costing two to three times more. The woofer is protected by a heavy gauge steel powder coated grill. Rubber foot pads on the bottom interlock with receptacles on the top for stacking two PM10As. The bottom pole mount cup offers universal mounting to pole stands and mounts. Carvin's active PM10A speaker features a 3-channel mixer for connecting a microphone, instrument and tape/CD/MP3 player. This is ideal for solo or duo performances in venues such as coffee shops, small to medium size clubs or restaurants. Each channel has its own level control, and when used in conjunction with the 3-band EQ, allows you to tailor the output for optimal sound and performance. XLR, 1/4" and RCA inputs provide flexibility with the components you connect. An additional XLR output allows for easy daisy-chaining of additional active PM speakers for use as either mains or monitors. - System Type: Internal Active System, 10-inch 2-Way, bass-reflex - Frequency Response: 60 Hz - 18 kHz (-10DB) - Crossover Frequency: 2.5k Hz - Coverage Pattern: 90H x 30upV x 45downV - Internal Amplifier full range: 400 Watts - Maximum SPL: 122dB peak - LF Driver: 10-inch Woofer - HF Driver: 1-inch exit 1.5-inch VC Titanium Driver - Enclosure: Molded Polypropylene Plastic - Suspension/Mounting: 1-3/8-inch pole mount cup with clamp and 4 fly Points - Transport: 1 side handles - Grill: Black steel - Connectors: Two XLRs (one Male, one Female), Two 1/4 TRS phone jacks, Two RCA jacks - AC Power Requirement: 90-250VAC 50-60Hz - Dimensions: 13" wide x 11" deep x 21.5" high - Weight: 23.4 lbs |
#17
|
|||
|
|||
Here's some of my gear, staging for a gig mount out with one of my bands. The box mixer is a Carvin XP800L.
|