The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Reply
 
Thread Tools
  #1  
Old 02-21-2012, 09:02 AM
ELP
Guest
 
Posts: n/a
Default Martin spot refinish on neck

-----[deleted]-----

Last edited by ELP; 02-27-2012 at 08:24 AM.
Reply With Quote
  #2  
Old 02-21-2012, 09:11 AM
ELP
Guest
 
Posts: n/a
Default

Fixed with Minwax stain/poly mix and lightly buffing with 0000 steel wool

Last edited by ELP; 03-03-2012 at 01:48 PM.
Reply With Quote
  #3  
Old 02-21-2012, 09:40 AM
RRuskin RRuskin is offline
Registered User
 
Join Date: May 2006
Location: Seattle WA
Posts: 2,631
Default

Leave it alone. A repair is more trouble than it's worth. Assuming you are going to play it, it won't be the last blemish your guitar gets.
__________________
Rick Ruskin
Lion Dog Music - Seattle WA
Reply With Quote
  #4  
Old 02-21-2012, 09:41 AM
charles Tauber charles Tauber is offline
Registered User
 
Join Date: Feb 2011
Posts: 8,381
Default

ELP,

First off, be aware that there are two general categories of wood finishes: penetrating and surface. Penetrating finishes do just as the name implies, they penetrate the fibers of the wood. Surface finishes do not appreciably penetrate the fibers of the wood but sit on top of the surface: they don't "soak in".

Oil finishes, including True oil, are penetrating finishes. Surface finishes include lacquers, poly's, varnishes, shellac, etc. With few exceptions, surface finishes don't adhere well to wood to which a penetrating finish has already been applied. In general, one shouldn't apply one on top of the other.

While penetrating finishes are generally easier to apply, they have the disadvantage that they are next to impossible to remove short of sanding, planing or scraping the impregnated wood away.
Reply With Quote
  #5  
Old 02-21-2012, 10:21 AM
tadol tadol is offline
Charter Member
 
Join Date: Aug 2008
Location: Berkeley, CA
Posts: 5,224
Default

It looks like you've rubbed thru the top coat and partially thru the color coat. The wood underneath probably still has a seal on it - not much, but a bit. To try and get color back on the spot, you would need to try and blend in a surface applied stain - maybe a stain-marker, or a stain applied with a small hobby brush. I'd try a couple stain markers, and blend them in. Once its all blended in as well as you can and dry, you would need to top-coat that area. You are trying the right materials, but you can't wipe them off immediately. You need to let them dry and then gently buff them smooth. Blending in a wiped or brushed finish is rather tricky, but keep the coats thin and remember that you are applying it primarily to protect the stain - you don't need alot of finish there.

I don't know whats on the neck now, and can't guess how well something is going to stick to it. And because it is all surface applied, there is a very good chance it will get worn thru as you play it alot ( depends on how much time you run your hand over that spot ).

Its not gonna cause huge or serious problems - think of it as more of a beauty mark, and enjoy your guitar -
__________________
More than a few Santa Cruz’s, a few Sexauers, a Patterson, a Larrivee, a Cumpiano, and a Klepper!!
Reply With Quote
  #6  
Old 02-21-2012, 10:45 AM
Kitchen Guitars's Avatar
Kitchen Guitars Kitchen Guitars is offline
Formerly Yamaha Junkie
 
Join Date: Jun 2007
Location: South West Pennsylvania
Posts: 7,930
Default

Take it to a great airbrush artist. Poof its gone. Is there an Art institute or a Orange county custom type shop around?
Reply With Quote
  #7  
Old 02-21-2012, 12:30 PM
Howard Klepper Howard Klepper is offline
Registered User
 
Join Date: May 2008
Location: Earthly Paradise of Northern California
Posts: 6,633
Default

"Or should I just quit being so anal, and stop worrying?"

Yeah. Do nothing. It needs nothing.
Reply With Quote
  #8  
Old 02-21-2012, 05:50 PM
ELP
Guest
 
Posts: n/a
Default

Sounds good. Thanks to everyone

Last edited by ELP; 02-27-2012 at 08:25 AM.
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair






All times are GMT -6. The time now is 08:28 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=