The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Reply
 
Thread Tools
  #16  
Old 08-22-2015, 03:01 AM
iim7V7IM7's Avatar
iim7V7IM7 iim7V7IM7 is offline
Charter Member
 
Join Date: Feb 2012
Location: An Exit Off the Turnpike in New Jersey
Posts: 3,685
Default

I have A set of copper finish/snakewood button GrandTunes them on one of my guitars from Bruce. They look and work great!



I think Bruce uses them because he likes the "S"!
__________________
Acoustic Flat Tops by: Bashkin | Blanchard | Brondel | Buscarino | Chasson | Franklin | Klepper | Sexauer
Reply With Quote
  #17  
Old 03-24-2016, 01:40 AM
Ken Franklin Ken Franklin is offline
Registered User
 
Join Date: Apr 2008
Location: Ukiah, CA
Posts: 229
Default

Quote:
Originally Posted by John Arnold View Post
AFAIK, ther are no open back tuners with that construction. For many of my customers, enclosed tuners are not an option.
.
Gotoh recently came out with an open back tuner that does have a screw in ferrule. Might be just the ticket for some. http://www.g-gotoh.com/international...product=sxn510
__________________
Ken Franklin
www.franklinguitars.com
Reply With Quote
  #18  
Old 03-24-2016, 10:36 AM
Bruce Sexauer's Avatar
Bruce Sexauer Bruce Sexauer is offline
AGF Sponsor
 
Join Date: Jan 2009
Location: Petaluma, CA, USA
Posts: 5,733
Default

Those Gotoh tuners look like a good idea to me. Apparently, however, they rattle or something judging by this line in their advertising copy: "The improved performance and durability which the SX510 series provides, thanks to GOTOHís unique design and manufacturing, gives you the chance to experience a sound youíve never heard before."
__________________
Bruce
http://www.sexauerluthier.com/
Reply With Quote
  #19  
Old 03-24-2016, 07:19 PM
The Bard Rocks The Bard Rocks is offline
Charter Member
 
Join Date: May 2009
Location: Mohawk Valley
Posts: 4,760
Default Grand tuners

I've liked almost every tuner I have had in the last 30-40 years. Probably because my first tuners were so awful, that anything was an improvement. An easy act to follow. The Shaller Grand Tuners are among my favorites, easy to use, accurate, and they hold well. They also were a good appearance choice in my case. But I didn't choose them specifically, but happily took whatever came with the guitar, perfectly happy that Bruce picked them.
__________________
The Bard Rocks

Kinnaird 000 Adk/Ziracote
Sexauer L00 Adk/Magnolia
Hatcher Jumbo Bearclaw/"Bacon" Padauk
Leach "Arctos" OM Millenium Sequioa/Macassar Ebony
Goodall Jumbo POC/flamed Mahogany
McAlister baritone Adk/Bubinga
Appollonio 12 POC/Myrtle
MJ Franks Resonator, all Australian Blackwood
'31 National Duolian
banjos of all kinds, mandolin, autoharp, tiple...
Reply With Quote
  #20  
Old 10-28-2016, 01:36 PM
patmatt patmatt is offline
Registered User
 
Join Date: Sep 2012
Location: Hudson Valley NYS
Posts: 11
Default Schallar Grand Tune

Love them. I have two Martin Custom shop guitars that came with cheap Martin open back tuners (Grover). (D-28 Cocobolo Adirondack Hide Glue, and Om-28 Guatemalan Rosewood, VTS Adirondack top, 2 of the best guitars I've ever owned). I opted for these because they are being used on Custom shop guitars and IMHO are smoother and easier to turn than Waverly tuners.
Reply With Quote
  #21  
Old 02-17-2017, 12:44 PM
OMO OMO is offline
Guest
 
Join Date: Feb 2017
Posts: 104
Default

What is the best machine head for Waverly style replacements? Is the Rogers really the best (with no specs on ratios) or is the Schaller the best or is the good old Waverly the best you can get in this style?

I'm using Waverly tuners now on my Martin OM but the Gotoh 510s on my Taylors really seem to be a better tuner to me. Of course, the Gotohs will not fit on my braz Martin and I am not drilling new holes that is for sure! The Waverlys have a sort of overly tight feeling. In my mind it is the tuning ratio being better in the Gotohs. Although I recognize the fine craftsmanship of the Waverly's.
Reply With Quote
  #22  
Old 02-11-2019, 09:24 AM
peteybabes's Avatar
peteybabes peteybabes is offline
Charter Member
 
Join Date: Dec 2013
Location: 'murica
Posts: 35
Default

no traffic on this for a while...

has anybody been using the latest versions of these tuners? I am wondering if I should spec them on my upcoming McKnight build
__________________
1800's Thompson & Odell Parlor Guitar Adi/Brw
1954 Martin D-18
1972 Martin 000-18
1977 Martin D-19
2008 McKnight "MiniMac" Adi/Coco #97
2012 Martin D-15M "Yuengling Special" #1 of 7
2017 Martin D-21 Special
2018 Martin D-18E Retro
2020 Pre*War HD Ordered
2021 McKnight "Sonic Boom Project" Ordered
_______________________
Peter
Reply With Quote
  #23  
Old 02-19-2019, 04:07 PM
maxmonte's Avatar
maxmonte maxmonte is offline
AGF Sponsor
 
Join Date: Oct 2017
Location: Abano Terme, Italy
Posts: 47
Default

I have used them on a few guitars, no issues and I really like the look of the vintage copper ones. They are not as smooth as a sealed gotoh 510, and the ratio is lower, but I think they are up there with the waverly.
Reply With Quote
  #24  
Old 03-16-2019, 01:32 PM
theEdwinson's Avatar
theEdwinson theEdwinson is offline
AGF Sponsor
 
Join Date: Aug 2009
Location: Fairhope, AL
Posts: 1,256
Default

Quote:
Originally Posted by peteybabes View Post
no traffic on this for a while...

has anybody been using the latest versions of these tuners? I am wondering if I should spec them on my upcoming McKnight build
I recently ordered three sets of the Grand Tune tuners direct from Schaller in Germany. Iím building a couple very special guitars for an upcoming show, and knowing Schallerís generally sterling reputation, I fell hard for the exotic finishes and button options of the Grand Tune design. Iím usually a Gotoh guy, but I thought these Grand Tunes would work well on these new guitars.

Sad to say, all three sets are junk. I would use a more pungent word, but this Forum frowns on that.

Two of my Grand Tune sets are the slot-head type, and the other for solid headstock. I got the gorgeous Vintage Copper finish, the Ruthenium, and a set of Black with Mother-of-toilet-seat buttons. Very attractive looking tuners, no doubt about it.
But I did notice, every tuner in every set had at least 1/8 turn of slop in the mechanism. Oh well, Waverlys do that too. I figured they might snug up under string tension.

I mounted the Vintage Copper set on my BRW/Bearclaw Zephyr 00 slotóhead guitar, and strung up. Right away, I noticed the slop was still there. And on the open G string, I got a loud sympathetic rattle at the headstock.None of the usual suspects- loose screws or bushings, sitar-ing at the nut, loose truss rod, etc.- were the problem. I could not locate the source of this rattle. And let me reiterate, it was LOUD.
I put the guitar aside to deal with later, and installed another set of the Grand Tunes on my quilted Maple/German Eclipse OM guitar.

Again, every tuner had an unacceptable amount of slop in the action, and they felt quite stiff when tuned to pitch. And AGAIN, on the open G string, that same loud rattle happened. ONLY on the open G string, not on open or fretted notes anywhere else.
This is on two different size guitars, different scale lengths, different headstock designs, and even different string sets. Same loud rattle on both open G strings.
I was not able to sleuth out the cause of that sympathetic rattle. Except that it was right there at the headstock. When I would press on the tuner gears, the rattle would diminish, but not go away.

The show is less than two weeks away, and I donít have time for this annoying glitch. So I threw a Hail Mary pass to StewMac and ordered a couple sets of the Swiss-made Schertler tuners. Iíve used them before, and never had a bad tuner in a set. They are well made and accurate. And they look nice too.

Well, I just finished retro-fitting the Shertlers, and there is no slop, no rattle, just the silky smooth and accurate tuning I expect in a quality tuner. And without that sympathetic rattle, the guitars sound great!

Iím not sure what to do about those Schaller Grand Tunes. I spent almost $500 on three sets, and they are garbage. Yes, I am upset about it.
Anyway, thatís my $0.02 on the matter. I would greatly appreciate any other experience-based opinions or thoughts from others, who have used the Grand Tune tuners from 2018-2019. Did I just get three bad sets, and all the rest of them are fine? What gives here?
__________________
Edwinson
Reply With Quote
  #25  
Old 03-16-2019, 05:12 PM
peter.coombe peter.coombe is offline
AGF Sponsor
 
Join Date: May 2012
Location: Bega, Australia
Posts: 91
Default

I would agree that the Schertlers are superior tuners, probably better than any other open back tuners on the market, but I have not had the experience you had with the GrandTune tuners. I think I have used 3 sets of GrandTune guitar tuners and many mandolin sets, and none have had any excessive slop or rattle problems. Maybe you got some early production sets that I have been told had some issues that were later fixed by Schaller.
Reply With Quote
  #26  
Old 03-17-2019, 12:21 AM
M Hayden M Hayden is offline
Registered User
 
Join Date: Nov 2007
Location: The Glorious East SF Bay, CA
Posts: 659
Default

Quote:
Originally Posted by Ken Franklin View Post
Gotoh recently came out with an open back tuner that does have a screw in ferrule. Might be just the ticket for some. http://www.g-gotoh.com/international...product=sxn510
I recently replaced a set of stock martin tuners with Gotoh SXN510V nickel finish, and the screw holes lined up fine. They are smooth and functional replacements for enclosed tuners.

Link to tuners: http://g-gotoh.com/international/product/sxn510v.html
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Thread Tools



All times are GMT -6. The time now is 12:58 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2000 - 2018, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=