The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Custom Shop

Reply
 
Thread Tools
  #1  
Old 03-01-2019, 07:50 AM
grosskate grosskate is offline
Registered User
 
Join Date: May 2016
Posts: 111
Default Michaud OM-R Fan Fret Build Thread

Hi everyone,

After the long and painful wait, It's finally my turn to challenge the great Joel Michaud for a quite special build.

Specs :

OM-R Florentine Cutaway Amazon Rosewood / Swiss "moon" Spruce

- Body joint : 14 frets
- Fan fret 635-660 (25-26) / Perpendicular Fret : 6 or 7
- Soundport
- Michaud Bevel Arm + Rib (a first for Joel)
- Fretboard : Rocklite
- Bridge : Rocklite
- Binding : Rocklite
- Nut size : 44mm
- Design with oxidised metal
- Machinehead : Robson 501
- Frets : EVO gold


I was lucky enough to visit Joel and his shop in Calgary back in January before the build started so we could discuss specs and select a great top. Joel is an amazing guy and so much fun to deal with. He takes his job very seriously and if you're picky about what you're looking for, he is definitely your guy ! Joel is a perfectionist who strive to always push further and bring his best in every guitar he makes. He experiments a lot with side projects allowing him to only incorporate in his build what he believes is working well. I think I'm really giving him a challenge with this one, and I'm quite picky...!


Here are few pics I can share with you of Joel's shop during my visit :






Now the wizard Joel holding what's going to become my guitar :




Closer look at the sets :



Amazon Rosewood :



Swiss Moon spruce top :





One of these will become my bridge : Bois de Rose (it darkens a lot when exposed to UV, and polishes really well) :




This is going to be a lot of fun !
__________________

Avalon Custom Auditorium Fan Fret Sinker Redwood/Ziricote
Furch 34 SR Stahl (custom) - Sitka/EIR
Classical Hanika 58CF - Alpine/Cocobolo
Yamaha LS16 - Engel/EIR
Alvarez MSD1 - Cedar/Mahogany
Breedlove C25 - Cedar/Mahogany
K-Country 1975 - Sitka/Mahogany
upcoming :
Michaud Made OM-R - ARW/ Swiss "moon"
Astrand A-OM - MRW - Euro Bearclaw

Last edited by grosskate; 10-28-2019 at 02:38 AM. Reason: add photo / Bridge material change from bois de rose to Rocklite
Reply With Quote
  #2  
Old 03-01-2019, 09:02 AM
islandguitar's Avatar
islandguitar islandguitar is offline
Moderator
 
Join Date: Jul 2011
Location: Rhode Island
Posts: 6,287
Default

Congrats on your upcoming build (s)! Astrand as well!! Wow!
The pics are absolutely delicious!
__________________
1993 Bourgeois JOM
1967 Martin D12-20
2007 Vines Artisan
2014 Doerr Legacy
2013 Bamburg FSC-
2002 Flammang 000 12 fret
2000 McCollum Grand Auditorium



______________________________
Soundcloud
Spotify
Mike McKee/Fred Bartlett Spotify playlist
Reply With Quote
  #3  
Old 03-01-2019, 07:54 PM
joshua89 joshua89 is offline
Registered User
 
Join Date: Oct 2017
Location: Singapore
Posts: 28
Default Beautiful

That amazon rosewood looks absolutely incredible. So does the moon spruce.

You are one lucky man. Getting guitars from 2 of my favourite luthiers. Will there be a post about your Astrand as well?
Reply With Quote
  #4  
Old 03-01-2019, 08:42 PM
virob virob is offline
Charter Member
 
Join Date: May 2012
Location: west coast
Posts: 314
Default

I’ll be watching this one. Nice wood choices and interesting specs. The oxidized metal will be fun.
Reply With Quote
  #5  
Old 03-02-2019, 12:12 PM
Nemoman Nemoman is offline
Charter Member
 
Join Date: Dec 2010
Location: N. California
Posts: 3,141
Default

Great to see the pics of Joel's shop and your amazing woods!

Love Joel's guitars, and I'm sure this will be no exception.

You're a lucky man--thanks for sharing the ride!
__________________
2013 Stehr Auditorium (Carpathian/Myrtle)
2015 Stehr Auditorium (Adi/BRW)
2020 Baranik Meridian (Blue Spruce/Manchinga)
2020 Wilborn Arum (Tunnel 14/Coco)
2021 Kinnaird Graybeard (BC Cedar/Bog Oak)
2022 Kinnaird CS Student Build (Adi/Padauk)
2023 Kinnaird FS (Italian/Koa)
Reply With Quote
  #6  
Old 03-02-2019, 12:25 PM
cigarfan's Avatar
cigarfan cigarfan is offline
Music soothes the soul!
 
Join Date: Jan 2012
Location: Within the blast radius of Washington D.C.
Posts: 5,177
Default

Woods look fantastic! That Spruce is so creamy.

Congrats on the build and thanks for sharing. I played a couple of Joel's at Woodstock. Wonderful tone.
__________________
Life is like a box of chocolates ....
Reply With Quote
  #7  
Old 03-02-2019, 09:28 PM
chippygreen chippygreen is offline
Registered User
 
Join Date: May 2017
Posts: 427
Default

Those woods look great - I'm looking forward to this thread!
__________________

Bashkin 00-12 Adi/Hog
Bashkin 0M-MS Swiss Moon/PRW(build thread)
Bashkin GC-12 Sitka/Koa
Carter-Poulsen J-Model German Select Spruce/MacEb
Fender MIJ Strat ('90) and 50s RW Tele ('19)
Martin 00-28c Spruce/BRW('67)
Martin M-36 (R) Sitka/EIR
Michaud O-R Cedar/Koa - New Build
Michaud J-R Sitka/MBW
K. Yairi RF-120 Spruce/EIR
KoAloha KTM-25 Koa/Koa
Yamaha G-231 Cedar/Hog ('71)
Reply With Quote
  #8  
Old 03-03-2019, 06:59 AM
Marcus Wong Marcus Wong is offline
Registered User
 
Join Date: Aug 2014
Location: Singapore
Posts: 1,649
Default

Hey Jason! Great to see this thread underway. As we've already discussed, your very own Michaud Made is going to knock your socks off! What an incredible build and I'm very much looking forward to seeing it progress. As well as the next build you have in store for us as well - hopefully we get to see that too!

Keep up the enthusiasm man!
__________________
.
THE GOLDEN ERA GUITAR
FOR SALE | VIDEOS

AUTHORISED DEALER OF:
Astrand | Bowerman | Brondel | Buendia | Casimi | Datlen | Doerr | Fujii | Gerber | GR Bear | Heinonen | Isaac Jang
Keith | Keystone | Matsuda | Michaud Made | Ogino | Pellerin | Petros | Poljakoff | Strahm | Tom Sands | Wingert

...and more

www.TheGoldenEraGuitar.com
[email protected]
+65 8666 0420

Last edited by Marcus Wong; 03-03-2019 at 09:50 AM.
Reply With Quote
  #9  
Old 03-03-2019, 07:46 PM
CoolerKing's Avatar
CoolerKing CoolerKing is offline
FKA matthewpartrick :)
 
Join Date: May 2013
Location: North Havana
Posts: 5,344
Default

Looking good!
Reply With Quote
  #10  
Old 03-03-2019, 09:27 PM
Ganes Ganes is offline
Registered User
 
Join Date: Jan 2019
Posts: 41
Default

That is some fantastic wood!.....oh his shop ain't bad either!! LOL
Another fun one to watch. Thanks for sharing.
Reply With Quote
  #11  
Old 03-04-2019, 03:29 AM
grosskate grosskate is offline
Registered User
 
Join Date: May 2016
Posts: 111
Default

Arm and Rib Bevels :







Joining the back + Back strip :











The rosette is in the making ...
__________________

Avalon Custom Auditorium Fan Fret Sinker Redwood/Ziricote
Furch 34 SR Stahl (custom) - Sitka/EIR
Classical Hanika 58CF - Alpine/Cocobolo
Yamaha LS16 - Engel/EIR
Alvarez MSD1 - Cedar/Mahogany
Breedlove C25 - Cedar/Mahogany
K-Country 1975 - Sitka/Mahogany
upcoming :
Michaud Made OM-R - ARW/ Swiss "moon"
Astrand A-OM - MRW - Euro Bearclaw
Reply With Quote
  #12  
Old 03-22-2019, 10:29 AM
grosskate grosskate is offline
Registered User
 
Join Date: May 2016
Posts: 111
Default

Update guys !! Rosette and Rim (almost finished) !

The rosette's finally done... Not without hard work though, trust me !

As in the specs I wanted an oxidised metal work which is kind of Michaud Made's signature design on his guitars, although other luthiers are kind of "copying/borrowing" this from him now.

After discussing with Joel, hecame up with a first shot that he, for some miscommunication with me glued on my soundboard before checking with me it was all good to me (he thought he did).

Unfortunately it wasn't to my liking and didn't have the vibe I wanted like some results it had on other builds. Obviously with this technic, Joel can get quite a lot of shades of various colors and pattern to end up with. I felt terrible knowing he spent a lot of time on it... But I had to say I didn't really like this result and the colors...

Joel didn't know if he would be able to route out the pieces of metal without making any damage to this soundboard which is quite an extraordinaty special one, but said he wanted this guitar to look right for me, so he would take the risk and the extra work on it. Trust me, Joel would go any length to get it right for you. I'm so fortunate to have chosen him as my builder.

Thanks to his skills, in the end the risky operation was a success (Joel added a new skill to his craftsmanship with this one hahaha).

After discussing a bit more about my vision of the colors and looks. He came up with new pieces of oxidised metal that were so beautiful that I don't even have words for it. Just stunning !

I of course gave him a big thanks and told him he could definitely glue those on !!

The general idea for the Rosette design came from Joel and that we slightly tweaked together (it's a lot of fun, I don't wanna get too much into the design process, but Joel listens and is willing to tweak/adapt to your needs so it fits to you tastes which is awesome)


Here is the process and final result of the rosette (metal pieces are not glued yet) :










RIM (almost finished) :




Can't wait for the rest of the process !! Thanks to Joel for being so invested and patient with me ! He's the nicest guy you can find
__________________

Avalon Custom Auditorium Fan Fret Sinker Redwood/Ziricote
Furch 34 SR Stahl (custom) - Sitka/EIR
Classical Hanika 58CF - Alpine/Cocobolo
Yamaha LS16 - Engel/EIR
Alvarez MSD1 - Cedar/Mahogany
Breedlove C25 - Cedar/Mahogany
K-Country 1975 - Sitka/Mahogany
upcoming :
Michaud Made OM-R - ARW/ Swiss "moon"
Astrand A-OM - MRW - Euro Bearclaw
Reply With Quote
  #13  
Old 03-22-2019, 12:14 PM
Diamondave's Avatar
Diamondave Diamondave is offline
Charter Member
 
Join Date: Jan 2006
Location: Venice CA
Posts: 2,576
Default

NICE...!!!!!
__________________
onedayatatime
Reply With Quote
  #14  
Old 03-22-2019, 01:01 PM
Ganes Ganes is offline
Registered User
 
Join Date: Jan 2019
Posts: 41
Default

very nice indeed.....keep the pictures coming!!
Reply With Quote
  #15  
Old 03-25-2019, 11:18 AM
Marcus Wong Marcus Wong is offline
Registered User
 
Join Date: Aug 2014
Location: Singapore
Posts: 1,649
Default

What an incredible build... you're one lucky dude and that's one sexy guitar

I have said this countless times already but it can't be stressed enough - Joel is a real stand up guy and does what it takes to make sure every guitar he builds is his best guitar!
__________________
.
THE GOLDEN ERA GUITAR
FOR SALE | VIDEOS

AUTHORISED DEALER OF:
Astrand | Bowerman | Brondel | Buendia | Casimi | Datlen | Doerr | Fujii | Gerber | GR Bear | Heinonen | Isaac Jang
Keith | Keystone | Matsuda | Michaud Made | Ogino | Pellerin | Petros | Poljakoff | Strahm | Tom Sands | Wingert

...and more

www.TheGoldenEraGuitar.com
[email protected]
+65 8666 0420

Last edited by Marcus Wong; 03-25-2019 at 11:48 AM.
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Custom Shop

Tags
amazon, fan fret, michaud made, moon spruce

Thread Tools





All times are GMT -6. The time now is 07:53 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=