#1
|
|||
|
|||
Tuning machine screws
I'm replacing my tuning machines with Grover 18:1 machines.
The holes through the mounting plate are 3/32", which is a No. 2 screw. I can only fine No. 3 (7/64") screws. Any help, please? Thanks a heap -HR Last edited by Hardrock; 07-23-2019 at 07:14 PM. |
#2
|
|||
|
|||
Stew Mac has them
https://www.stewmac.com/Hardware_and..._Pegheads.html |
#3
|
|||
|
|||
Thanks, those are No. 3 screws though
|
#4
|
|||
|
|||
A thought
Look for general hardware vendors. #2 sheet metal screws are as common hardware as exists.
|
#5
|
|||
|
|||
Try Amazon.
https://www.amazon.com/Wood-Screws-P...ateway&sr=8-13 https://www.amazon.com/C-B-Gitty-Cra...gateway&sr=8-8
__________________
"Still a man hears what he wants to hear, and disregards the rest." --Paul Simon |