#46
|
|||
|
|||
Quote:
In response to your question of why I lumped Eastman into the same category as Taylor -- the answer is because they are a factory. Factories are set up and organized for speed and efficiency. IMO, the technology a factory utilizes is more about repeatability and cost savings from labor -- the basic goal is still to build as much product as you can while hopefully maintaining a high level of quality. Last edited by Kerbie; 08-28-2019 at 11:19 AM. Reason: Edited quote |
#47
|
|||
|
|||
Yeah he’s quite talented. He also winds his own pickups. Because of no CNC no two guitars are exactly the same. I think hand made and hand crafted mean the same thing. But there is a difference when you make a guitar from raw wood, or just putting together a Warmoth body and neck. |
#48
|
||||
|
||||
To me Collings is far from a boutique or small-shop builder. They are a factory that produces guitars and other stringed instruments.
|
#49
|
|||
|
|||
Quote:
It was born out of a continuing frustration. It is important to note that the annual quantity of guitars Eastman produces pales in comparison to a long list of factory builders. This is directly due to the fact that they use people and hand tools more than any other "factory". That's part of what I was trying to say.
__________________
Nothing bothers me unless I let it. Martin D18 Gibson J45 Gibson J15 Fender Copperburst Telecaster Squier CV 50 Stratocaster Squier CV 50 Telecaster Last edited by Kerbie; 08-28-2019 at 11:20 AM. Reason: Rule #1 |
#50
|
|||
|
|||
I imagine with time, Eastman will likely begin to utilize more CNC machinery. It takes a fair amount of technical knowledge and expense to outfit and implement a CNC machine in a factory setting but it is worth it in terms of consistency and repeatability.
There are also certain operations that when done repeatedly for years can lead to injury. I'd hate to be the guy that carves braces or necks all day !!! If the workers get to do lots of different task with regularity it does help but it is less efficient that way. |
#51
|
|||
|
|||
I am not sure why Eastman comes up in this thread. They use the label handcrafted for their marketing yes, but in the videos they show the unskilled labourers performing simple tasks and passing it on to the next person. If they just do what any robot could do as well, then there's no advantage to that just because the labour is much cheaper than a robot. It's still "mass production" if they produce many of the same items. I think in other threads the estimated number was at least 200,000 units per year a couple of years ago, which by now is probably much higher as they are getting quite common even in smaller stores. My tiny local shop just started stocking them and they had to take at least six units to get started.
Last edited by Kerbie; 08-28-2019 at 11:20 AM. Reason: Quote edited |
#52
|
|||
|
|||
Quote:
But I have to play devils advocate here. Does he have a band saw? A sander? A planer? Or does he truly just chop it with the edge of his hand? |
#53
|
||||
|
||||
I draw a line at what guides the tool. CNC is computer guided, that’s obviously on one side of the line. A router held and guided by eye hand coordination is considered by myself to be on the other side of the line. A router following a hard template is more controversial. I consider it not “hand”operated because it is following a repeatable template. This is an arguable point, but philosophically it is what I believe. The line, for me, has to do with whether or not the work is blindly following a formula, or is instead a part of the design process wherein the results are builder-influenced structurally by the variability of the materials and the specific goal.
The real question, then, is not so much whether there is a difference between handmade and hand-crafted (semantics IMO), but the degree to which art-process is incorporated as opposed to manufacturing process. This would matter to me, of course, as I am as far out on the Art-Process side as I can be and still be making what appear to be conservative guitars. Arguably art, but actually music tools. In my opinion, of course. |
#54
|
||||
|
||||
Quote:
I'm sure not trying to downplay FroggyBottom. Perhaps FroggyBottom and SantaCruz belong in the same category. I have never considered either in the same category as solo builders. If they are a collective of solo builders sharing a shop/tools, and each is pursuing the build and voicing of single guitars through-out the whole process if single instruments, that would make a difference on the way I view them. I've played and liked guitars fashioned by both. Where would you put Huss & Dalton in the mix? |
#55
|
|||
|
|||
Quote:
What you see in the video is accurate but not everything you see those folks doing is everything that is going on. There are highly skilled folks hand carving necks and doing finish work totally by hand. The point is, it's still being done by hand, not a robot. To me that's the definition of hand-crafted, hand-made or whatever ... human beings making things their hands or with tools in their hands. YMMV.
__________________
Nothing bothers me unless I let it. Martin D18 Gibson J45 Gibson J15 Fender Copperburst Telecaster Squier CV 50 Stratocaster Squier CV 50 Telecaster Last edited by rokdog49; 08-27-2019 at 05:54 PM. |
#56
|
|||
|
|||
To me, it is really immaterial how many staff r employed or how many hand tools are used r whether compiter aided machinery is used or how many guitars are produced. The question is - are they individually voicing each guitar such as tap tuning or other methods so as to optimise the tone of the individual guitar or are they instead producing a product in that they are thicknessing the parts to the same dimensions following a template or set specification regardless of the characteristics and stiffness of the wood sets used in each guitar? If they are doing the former then they are not a factory but if they are doing the latter they are a factory.
Quote:
__________________
In the end it is about who you love above yourself and what you have stood for and lived for that make the difference... |
#57
|
|||
|
|||
Human beings using their hands are also the norm in Taylor or Gibson or Martin. In only some operations are large scale machinery like band saws or computer aided machinery used to form certain parts but most of the operations are still done by human hands using hand tools. In fact some solo builders either use the same equipment or source their parts from suppliers using such equipment. So that may not be a definition that works to really make a working distinction between folks who are really doing philosophically different things.
Quote:
__________________
In the end it is about who you love above yourself and what you have stood for and lived for that make the difference... |
#58
|
|||
|
|||
If I recall correctly one guy does some of the parts while another guy does the finishing while michael millard does the individual voicing.
Quote:
__________________
In the end it is about who you love above yourself and what you have stood for and lived for that make the difference... |
#59
|
|||
|
|||
Quote:
FYI, the process used by Collings or Bourgeois is very little different from Martin, Gibson, or Taylor. None are completely machine made, but machines do the bulk of the 'grunt' work. This is based on actual observation at the respective factories. Eastman's claim of more handwork is meaningless without a marked improvement in quality, and it also points out the ridiculously low labor cost in China. Even most individual boutique luthiers make use of machines to a certain point, since it reduces labor without negatively affecting the outcome. |
#60
|
||||
|
||||
Quote:
The Lowden staff (2017)- The solo-built ones are made by him and his son, à la Goodall. |