#1
|
|||
|
|||
Need Vintage Ibanez Concord Bridge /Saddle
I own a 1975 Vintage Ibanez Concord 686 Acoustic guitar. When I was working on it I lost the bone saddle. Can't fined it anywhere ! So I'm out looking for one or for one that will fit. I can make one but It's 1/4 inch thick bone compensated. I don't have any bone that thick. If any one might have an idea please let me know. Thanks and God Bless
|
#2
|
|||
|
|||
Superglue 2 bone blanks together.
You need to be quick - Superglue bonds bone almost instantly!
__________________
Brucebubs 1972 - Takamine D-70 2014 - Alvarez ABT60 Baritone 2015 - Kittis RBJ-195 Jumbo 2012 - Dan Dubowski#61 2018 - Rickenbacker 4003 Fireglo 2020 - Gibson Custom Shop Historic 1957 SJ-200 2021 - Epiphone 'IBG' Hummingbird |
#3
|
|||
|
|||
If 15/32" doesn't work, buy two 1/8" thick and laminate with CA glue.
https://www.lmii.com/13-parts/s-240/...ame.asc&page=3 |
#4
|
|||
|
|||
I had an old Ibanez with a thick saddle like that and I found a couple blanks cheap on eBay. I'm glad I bought two because I screwed the first one up! This was a couple years ago, but you should be able to find one. It was a LOT o work and a good learning experience. I'm still not done with the project.
|
#5
|
|||
|
|||
|
#6
|
|||
|
|||
I’d contact Bob Colosi @ guitarsaddles.com. He offers top quality products. You have to watch what buy on eBay. Some of the bone products for sale are actually plastic.
__________________
Taylor V-Class 814ce, 717e BE WHB, 520ce, 454ce, 420 Cedar\Maple, T5z Classic Martin D18E Retro Cordoba C10 Crossover Emerald X20 Rainsong H-OM1000N2 Voyage-Air VAD-04 Custom Les Paul Hot Rod Deville 410, Fishman Loudbox Performer |