#31
|
|||
|
|||
The walnut neck looks wonderful--are you going with a satin finish on it?
I'm enjoying watching this come together!
__________________
2013 Stehr Auditorium (Carpathian/Myrtle) 2015 Stehr Auditorium (Adi/BRW) 2020 Baranik Meridian (Blue Spruce/Manchinga) 2020 Wilborn Arum (Tunnel 14/Coco) 2021 Kinnaird Graybeard (BC Cedar/Bog Oak) 2022 Kinnaird CS Student Build (Adi/Padauk) 2023 Kinnaird FS (Italian/Koa) |
#32
|
||||
|
||||
Thanks buddy! I think it will be gloss. Do you think it should be satin? I think every guitar I own is glass, but maybe there's a better way?? I'm open minded, let me know. Thx!
__________________
"A good name is to be chosen rather than great riches, and favor is better than silver or gold." Woody (aka: Mike) FOR SALE: Kinnaird Brazilian!! |
#33
|
|||
|
|||
My neck finish will be satin. The rest of the body, headstock and back of headstock will be gloss. It’s more of which finish you prefer while playing. If your fingers and palms perspire a lot a gloss finish may cause stickiness while playing and unsightly stains after. Thankfully I don’t but I prefer the smoother and faster feel of a satin neck. It’s also fuss-free in terms of maintenance
Your rosette design is killer! A few months ago I somehow came across that same design online (not knowing that it was your old guitar) and told John I wish we could rewind and do this on my guitar instead. He said he was in the process of building a guitar with that same design (again not knowing that it was your current build!) and I was very envious.
__________________
-------------------------------------------------------------- 2021 John Kinnaird Graybeard-12 Lucky Strike / African Blackwood 2006 Brook Euro Spruce / Flamed Maple Taw |
#34
|
||||
|
||||
Quote:
And thanks for the kind words on the rosette. I've always loved that design from the first time I set eyes on that first guitar. We changed it up just a bit, but heck the original design was so nice, we just couldn't see changing much. I like your rosette very well. I think you'll love it over time as the pattern and the woods are so interesting!
__________________
"A good name is to be chosen rather than great riches, and favor is better than silver or gold." Woody (aka: Mike) FOR SALE: Kinnaird Brazilian!! |
#35
|
||||
|
||||
Quote:
__________________
Kinnaird Guitars |
#36
|
||||
|
||||
Top struts
Quote:
And comfort too. Carry on and have FUN Paul
__________________
4 John Kinnaird SS 12c CUSTOMS: Big Maple/WRC Dread(ish) Jumbo Spanish Cedar/WRC Jumbo OLD Brazilian RW/WRC Big Tunnel 14 RW/Bubinga Dread(ish) R.T 2 12c sinker RW/Claro 96 422ce bought new! 96 LKSM 12 552ce 12x12 J. Stepick Bari Weissy WRC/Walnut More |
#37
|
|||
|
|||
Quote:
Either way, that walnut will be lovely!
__________________
2013 Stehr Auditorium (Carpathian/Myrtle) 2015 Stehr Auditorium (Adi/BRW) 2020 Baranik Meridian (Blue Spruce/Manchinga) 2020 Wilborn Arum (Tunnel 14/Coco) 2021 Kinnaird Graybeard (BC Cedar/Bog Oak) 2022 Kinnaird CS Student Build (Adi/Padauk) 2023 Kinnaird FS (Italian/Koa) |
#38
|
|||
|
|||
Quote:
I was sure they were there for a reason but not being a builder, I couldn't figure out why they were there. I guess if I'd looked more closely I might have read about the floating fingerboard extension. Thanks again, PJ
__________________
A Gibson A couple Martins |
#39
|
|||
|
|||
Many builders install these carbon fibre tubes. Rick Turner was the first I came across, around 2002. He installed 4 tubes from neck block to waist and called them flying buttresses. Mark Swanson, Howard Klepper, Kent Chasson, Tod Rose, David Myka and of course Tim McKnight are some of the others. I copied Rick Turner's method when I built myself an acoustic bass guitar in 2008.
|
#40
|
||||
|
||||
Quote:
Thanks for the input Dave. You seem to know more builders that I do who use these rods. I could have named Rick Turner and Tim McKnight but that's about it. I assume this picture is your work. Looks like a clean well engineered body.
__________________
Kinnaird Guitars |
#41
|
||||
|
||||
A little neck work
Speaking of carbon fiber
The neck has a carbon fiber “D” tube embedded in it. It’s a pricey reinforcement but probably adds the maximum amount of neck stiffness short of solid steel and it is lighter than the wood it replaces. To stiffen that fingerboard extension which will be floating over the top with nothing under it except that quarter inch of wood you can see notched into the neck I embed more carbon fiber vertical rods. The D tube would be too thin and its engineered “box” structure reduced to weakness if it were extended into the fingerboard extension. SO Two grooves are plowed into the walnut extension and into the meaty portion of the neck to house the carbon fiber rods You can see the little rods awaiting their new home The rods are deeper than their slots. After they are epoxied in place the fingerboard will have shallow grooves plowed into the underside to accommodate the raised portion of the carbon fiber. When the fingerboard is glued in place the rods and the wood under the fingerboard extension and the fingerboard will become one unit and the carbon fiber will not be compromised as much by the inevitable tapering that happens to that walnut under the fingerboard when fitting the neck. So all the CF is being clamped in place with straight edges to keep things straight and the cheeks for the peghead are also getting added.
__________________
Kinnaird Guitars |
#42
|
||||
|
||||
These things WORK.
Quote:
Go John. Mike, our necks are in close proximity... woohoo Salud Paul
__________________
4 John Kinnaird SS 12c CUSTOMS: Big Maple/WRC Dread(ish) Jumbo Spanish Cedar/WRC Jumbo OLD Brazilian RW/WRC Big Tunnel 14 RW/Bubinga Dread(ish) R.T 2 12c sinker RW/Claro 96 422ce bought new! 96 LKSM 12 552ce 12x12 J. Stepick Bari Weissy WRC/Walnut More Last edited by Guitars44me; 11-22-2020 at 10:20 AM. |
#43
|
||||
|
||||
Of course it's Christmas and John tells me that he not only has a bunch of guitars in process, but he also has a "secret" Christmas project on the bench as well. So...I won't reveal the secret, but I will show a picture that he sent me of some progress on the fretboard. We had a long delay as a result of a vendor not delivering Paua as promised. But, we're back in the game again now
__________________
"A good name is to be chosen rather than great riches, and favor is better than silver or gold." Woody (aka: Mike) FOR SALE: Kinnaird Brazilian!! |
#44
|
|||
|
|||
Very nice--that fretboard looks amazing!
__________________
2013 Stehr Auditorium (Carpathian/Myrtle) 2015 Stehr Auditorium (Adi/BRW) 2020 Baranik Meridian (Blue Spruce/Manchinga) 2020 Wilborn Arum (Tunnel 14/Coco) 2021 Kinnaird Graybeard (BC Cedar/Bog Oak) 2022 Kinnaird CS Student Build (Adi/Padauk) 2023 Kinnaird FS (Italian/Koa) |
#45
|
||||
|
||||
Oooohhhhh
My goodness that Paua is spectacular !!!
And a secret Christmas project, woohoo. Hang in there!!! Paul
__________________
4 John Kinnaird SS 12c CUSTOMS: Big Maple/WRC Dread(ish) Jumbo Spanish Cedar/WRC Jumbo OLD Brazilian RW/WRC Big Tunnel 14 RW/Bubinga Dread(ish) R.T 2 12c sinker RW/Claro 96 422ce bought new! 96 LKSM 12 552ce 12x12 J. Stepick Bari Weissy WRC/Walnut More |