#1
|
||||
|
||||
Turning an unfinished basement into a home studio
Just about finished with due diligence on a home and all looks good.
The home has a 500 foot unfinished basement (Concrete floors, walls have insulation and sheet rock. The 8 foot ceiling has non. Looking to create a home studio and I just want to learn as much as a can about turning this space into an acceptable sounding room, to record vocals and acoustic guitar. I don't expect it to sound like a professionally designed and constructed studio. I realize that ain't gonna happen. What I want to do is focus on making it as optimal as it can be. I already have a good amount of gear and acoustic panels from "real traps" and other companies, so the focus would be on the room. (As I type this I hear a slew of fire truck sirens out side my NYC window. The home is in a very quite neighborhood - LOL) Ultimately I would love to get advice from an experienced acoustical engineer (Any one have an idea about consult fees - I will be 30 minutes west of Asheville NC). In the mean time I want to read up on as much as I can as well as seek out advice from folks who have done what I plan on doing. Some, but no all concerns are: HVAC ducts (heat pump) run through the space Best material for flooring (once I address any moisture issues) How best to finish the ceiling (insulation and Acoustic sheet rock?) Aside from running electrical I will be doing the basics my self.
__________________
David Webber Round-Body Furch D32-LM MJ Franks Lagacy OM Rainsong H-WS1000N2T Stonebridge OM33-SR DB Stonebridge D22-SRA Tacoma Papoose Voyage Air VAD-2 1980 Fender Strat A few Partscaster Strats MIC 60s Classic Vib Strat |
#2
|
|||
|
|||
There's a couple of home-brews over on the Talkbass website:
https://www.talkbass.com/threads/pro...r-way.1136733/ I know there are some really good books out there on home studio construction but I don't own any personally so I'll defer recommendations to others. Be sure to check out the "Post Your Recording Acoustic Setup" topic: http://www.acousticguitarforum.com/f...d.php?t=273107 Last edited by Rudy4; 01-08-2017 at 10:41 AM. |
#3
|
|||
|
|||
__________________
Jim 2023 Iris ND-200 maple/adi 2017 Circle Strings 00 bastogne walnut/sinker redwood 2015 Circle Strings Parlor shedua/western red cedar 2009 Bamburg JSB Signature Baritone macassar ebony/carpathian spruce 2004 Taylor XXX-RS indian rosewood/sitka spruce 1988 Martin D-16 mahogany/sitka spruce along with some electrics, zouks, dulcimers, and banjos. YouTube |
#4
|
||||
|
||||
Thanks Rudy and Jim.
__________________
David Webber Round-Body Furch D32-LM MJ Franks Lagacy OM Rainsong H-WS1000N2T Stonebridge OM33-SR DB Stonebridge D22-SRA Tacoma Papoose Voyage Air VAD-2 1980 Fender Strat A few Partscaster Strats MIC 60s Classic Vib Strat Last edited by Mbroady; 01-08-2017 at 03:04 PM. |
#5
|
|||
|
|||
Sent You a PM
Aloha mbroady,
I sent you a PM. alohachris |
#6
|
||||
|
||||
Hey alohachris
Thanks for all the info in you PM. Being on a budget this info will go a long way. I posted the links just in case others might find it helpful http://www.homebrewedmusic.com/2009/...-on-the-cheap/ http://www.homebrewedmusic.com/2011/...adband-panels/ http://www.dougyoungguitar.com/studio.php
__________________
David Webber Round-Body Furch D32-LM MJ Franks Lagacy OM Rainsong H-WS1000N2T Stonebridge OM33-SR DB Stonebridge D22-SRA Tacoma Papoose Voyage Air VAD-2 1980 Fender Strat A few Partscaster Strats MIC 60s Classic Vib Strat Last edited by Mbroady; 01-09-2017 at 02:26 AM. |
#7
|
||||
|
||||
There is a wealth of information on this web sight , although ( it took me sometime to get a handle on the gist of a number of things and terminology )
http://johnlsayers.com/phpBB2/index.php
__________________
Enjoy the Journey.... Kev... KevWind at Soundcloud KevWind at YouYube https://www.youtube.com/playlist?lis...EZxkPKyieOTgRD System : Studio system Avid Carbon interface , PT Ultimate 2023.12 -Mid 2020 iMac 27" 3.8GHz 8-core i7 10th Gen ,, Ventura 13.2.1 Mobile MBP M1 Pro , PT Ultimate 2023.12 Sonoma 14.4 |
#8
|
|||
|
|||
I would not change the flooring just for the sound but for aesthetics in which case go with solid wood if the usual basement moisture issue has been tamed .
Otherwise, just paint/stain the floor with a good concrete product, and use throw rugs for comfort and to dampen some reverberation. Ceiling - rockwool in the cavities and then a double layer of sheetrock green-glued together. If you've got enough ceiling height, you can use rubber spacers, or even suspend a new ceiling not attached to the framing above. Heating ductwork- you can wrap it in standard fiberglass, but if its noisy when running, the only real option is to turn it off when recording with mics.
__________________
Mike My music: https://mikebirchmusic.bandcamp.com 2020 Taylor 324ceBE 2017 Taylor 114ce-N 2012 Taylor 310ce 2011 Fender CD140SCE Ibanez 12 string a/e 73(?) Epiphone 6830E 6 string 72 Fender Telecaster Epiphone Dot Studio Epiphone LP Jr Chinese Strat clone Kala baritone ukulele Seagull 'Merlin' Washburn Mandolin Luna 'tatoo' a/e ukulele antique banjolin Squire J bass |
#9
|
|||
|
|||
The only issue that you won't be able to fix after the build is the HVAC hiss. If I were to do mine again, I would treat the inner ductwork with some sort of sound dampening. At least make sure the intake and returns are not installed directly over where you plan to use mics. Depending on proximity, you might even consider extending a remote power switch to the furnace/AC to be save yourself having to walk back and forth and forgetting to turn it back on following crucial sessions. Everything else can be controlled with some well placed Auralex paneling, diffusers and baffles.
__________________
|
#10
|
||||
|
||||
A couple of techniques to reduce A/C noise, the type coming in through the duct work:
1. Go to high volume/low velocity A/C supply. The cheapest way to accomplish this is to start as far as you can away from the room and increase the size of the duct. A large percentage of flow noise is generated by the rush of air through a restricted space (the duct). Increasing the size of the duct lowers the pressure and the velocity of the air while allowing equal volume to pass. 2. Create and install a "labyrinthine box" outside your room in your expanded supply duct. This is a high capacity box with fiberglass lining that contains at least 180' of turns to isolate upstream noise. The mean diameter of your expanded duct should be maintained throughout the turns to prevent noise increase. An experienced A/C mechanic should be able to build these for you. The labyrinthine box reduces all forms of sound transmission through the duct, including noise from adjacent room via the registers in that room as well as machine noise. Bob
__________________
"It is said, 'Go not to the elves for counsel for they will say both no and yes.' " Frodo Baggins to Gildor Inglorion, The Fellowship of the Ring THE MUSICIAN'S ROOM (my website) |