#1
|
|||
|
|||
Dovetail Joint Adding Wood back in
Hello!
I’m doing my first Stewmac body built kit. I believe I have took too much wood off the cheek of the neck side of the dovetail. What is my best strategy for adding wood back in here. I know because I have a large gap when dry fit. I got to busy taking wood to get the fretboard down. |
#2
|
|||
|
|||
Shim the male part of the dovetail with a piece of wood veneer.
It will tighten the gap back up and you can redo. Not an uncommon fix when resetting a neck. |