The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Harp Guitar

Reply
 
Thread Tools
  #1  
Old 01-07-2020, 12:38 PM
Bass.swimmer Bass.swimmer is offline
Registered User
 
Join Date: Jun 2018
Posts: 52
Default Super treble tuning pegs

I'm starting to build a new harp guitar, and I was wondering: for those who play harp guitar with super treble strings, do you prefer zither tuning pins or tuning machines? And what are the benefits/drawbacks to each?
Reply With Quote
  #2  
Old 01-09-2020, 10:17 PM
Teleplucker's Avatar
Teleplucker Teleplucker is offline
Moderator
 
Join Date: Jan 2006
Location: North Carolina
Posts: 1,645
Default

If zither tuners require a special wrench, I would definitely prefer regular guitar tuners.
__________________
My YouTube Page
Reply With Quote
  #3  
Old 01-10-2020, 10:52 AM
Bax Burgess Bax Burgess is offline
Registered User
 
Join Date: Sep 2010
Location: SE PA
Posts: 2,344
Default

A point of interest would be the stability of the tuning pins compared to that of machines. If a pin's tapered hole becomes a problem, a reaming is probably necessary, alternately, if a machine goes bad, replace it/the whole set. A second point: Where did I put that tuning key?
Reply With Quote
  #4  
Old 03-27-2020, 10:07 AM
Alan Carruth Alan Carruth is offline
Registered User
 
Join Date: Feb 2011
Posts: 3,303
Default

John Doan's guitar uses banjo fifth string tuners for the supers. I made one like that, and they work well, although it's something of a layout issue getting them all in. You need to cut down the size of the buttons, for sure!. They're not light in weight, of course, and they're more expensive than most tuners.

They're designed to be driven into a tapered hole to hold them in place, with a raised 'ear' that keeps them from rotating. I worried about splitting the block they were mounted in doing that, and came up with an alternative. The taper part of the body casting is hollow, and I found I could tap it using a metric 7mm x 1 pitch tap. This allowed me to ream the hole out to a simple snug fit, with a filed groove for the ear, and bolt them in from underneath. Your local hardware store probably doesn't carry the Allen head metric setscrews you'll need, but I got them by mail order pretty easily. I also laminated a block up out of five layers of persimmon with the grain mis-aligned to resist splitting. Over kill, perhaps, but I hate seeing stuff come back.
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Harp Guitar

Thread Tools





All times are GMT -6. The time now is 05:10 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright ©2000 - 2020, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=