The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Reply
 
Thread Tools
  #1  
Old 01-15-2021, 05:08 PM
Mirosh Mirosh is offline
Charter Member
 
Join Date: Oct 2019
Location: Duluth, Minnesota
Posts: 241
Default Source of saddle shims?

Where can an amateur guitar lover get saddle shims - a variety of thicknesses, of hard material like rosewood or bone or other suitable material? I'm ready to move beyond credit cards and blister pack! What do you use or recommend?
Reply With Quote
  #2  
Old 01-15-2021, 06:02 PM
redir redir is offline
Registered User
 
Join Date: Aug 2011
Location: Mountains of Virginia
Posts: 6,062
Default

I would recommend a new saddle

You can buy thin wood veneer from any luthier supply. It will be way more then you need but still.
Reply With Quote
  #3  
Old 01-15-2021, 06:40 PM
Bruce Sexauer's Avatar
Bruce Sexauer Bruce Sexauer is offline
AGF Sponsor
 
Join Date: Jan 2009
Location: Petaluma, CA, USA
Posts: 6,522
Default

I don't generally recommend shimming a saddle as the shim must be as hard as the saddle and utterly bonded to the saddle if it is not to impair the guitar's function. If I do shim a saddle (or nut), I favor paper permeated with ca glue. It is a consistent thickness, easily accomplished, nearly invisible on a nut, and handles the structural requirements very well.
__________________
Bruce
http://www.sexauerluthier.com/
Reply With Quote
  #4  
Old 01-16-2021, 06:06 AM
JayBee1404's Avatar
JayBee1404 JayBee1404 is online now
Charter Member
 
Join Date: Nov 2016
Location: United Kingdom
Posts: 3,134
Default

Bob Colosi.

http://www.guitarsaddles.com/SaddleShim.asp
__________________
Brook ‘Lamorna’ OM (European Spruce/EIR) (2019)
Lowden F-23 (Red Cedar/Bastogne Walnut) (2017)
Martin D-18 (2012)
Martin HD-28V (2010)
Fender Standard Strat (2017-MIM)
Reply With Quote
  #5  
Old 01-16-2021, 08:06 PM
Boozehound Boozehound is offline
Charter Member
 
Join Date: Jan 2018
Location: South Jersey
Posts: 409
Default

Colosi is great for shims, but I second the recommendations to just get a new saddle. I find properly shimming a saddle to be a lot more work than just sanding down a replacement.

Bob Colosi can hook you up with pretty much anything you need from a saddle perspective.
__________________
Froggy Bottom Model S Deluxe | Santa Cruz D/PW | Lowden F35 12-Fret | Santa Cruz OM/PW | Santa Cruz 000 Cocobolo / Italian Spruce | Martin Gruhn Guitars Custom D-21 Adi/Madi | Martin MFG Custom D-18 Adirondack Ambertone | Gibson J-45 |
Reply With Quote
  #6  
Old 01-18-2021, 05:21 PM
Big Band Guitar Big Band Guitar is offline
Registered User
 
Join Date: Mar 2017
Posts: 850
Default

The only time I shim a saddle is to determine the height that is needed to make a new saddle.
__________________
"My opinion is worth every penny you paid for it."

"If you try to play like someone else, Who will play like you". Quote from Johnny Gimble

The only musician I have to impress today is the musician I was yesterday.

No tubes, No capos, No Problems.
Reply With Quote
  #7  
Old 01-19-2021, 06:14 PM
Dyson Guitars's Avatar
Dyson Guitars Dyson Guitars is offline
Custom Guitars
 
Join Date: Apr 2019
Location: Hillsborough, NC
Posts: 67
Default

I’ve glued a thin strip of bone to the bottom of a bone saddle using CA superglue. I put it on a little oversized and then shaped it to fit the existing saddle and then sanded it down to the height I wanted. It worked okay. Just use a piece off of a different saddle.
Reply With Quote
  #8  
Old 01-19-2021, 07:28 PM
Bill Kraus's Avatar
Bill Kraus Bill Kraus is offline
AGF Sponsor
 
Join Date: Jan 2016
Location: western new york
Posts: 445
Default

I'm pretty sure Stewart-MacDonald had bone shim stock.
__________________
http://www.krausguitars.com
Reply With Quote
  #9  
Old 01-28-2021, 04:20 PM
ArchtopLover's Avatar
ArchtopLover ArchtopLover is offline
Charter Member
 
Join Date: Sep 2020
Location: Blanchardville, Wisconsin
Posts: 74
Default Bone Saddle Shims Available at LMI

I have been using the bone saddle/nut shim material available from LMI for a few years now. This shim material is 0.02" thick, is real bone and is reasonably priced. These bone shims work great and easily cut with a fine toothed saw; do not use a knife, the shim will chip. Glue up with CA glue for a very strong bond. I suggest to always glue the shim to the saddle or nut and not into the saddle or nut slot, then sand and profile as needed. Sounds amazing, way better than cardboard, paper or wood.

Here is the link:

https://www.lmii.com/nuts-saddles/15...475-x-020.html

Be advised that when using CA glue with this natural bone material, the CA glue cures very fast, no accelerator needed.
__________________
Leonard

1918 Gibson L-1
1928 Gibson L-4 (Blond w/Ebony Fret-board)
1930's Kalamazoo KG-32
1930's Gretsch F-50
1934 Gibson L-7
1934 Gibson L-50 (KG-11/14 Body Shape)
1935 Gibson L-50 (Flat-back)
1935 Gibson L-30 (Flat-back)
1942 Gibson L-50 (WWII Banner Head)
1948 Gibson L-50
1949 Epiphone Blackstone


"a sharp mind cuts cleaner than a sharp tool"
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Thread Tools





All times are GMT -6. The time now is 01:22 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright ©2000 - 2021, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=