#46
|
|||
|
|||
I have a D1AT non baked and a D1 Baked sitka. I currently have the traditional for sale because I prefer the sleeker neck of the standard. I also prefer a standard drop in saddle for fishman pickup application. Yes I know everyone likes KK mini pickups but for what I do I like the fishman matrix. Back to sound and playability. The baked sitka top gave me what I wanted right out of the gate. Loud, boomy (yes my collings is boomy like a martin), shimmery, articulate and a joy to play. Easy to play. No struggle.
The D1AT is a warmer, stiffer feel hence the traditional more Martin style build. The notes still pop out and response is good but not like the sitka top D1. That's the whole difference between the original standard Collings build and the traditional with adirondack. Eventually that A top will open up and be an even more kick a#@ instrument. Anyway both are great guitars but I prefer the standard modern build and feel. The traditional is like a martin Authentic (only better) If it had the standard neck I would keep it. It's not a bat by any means at all...I just like thinner necks. |
#47
|
|||
|
|||
I've only played one Collings, a D1 I believe is what it was. Totally just did nothing for me. The neck was a baseball bat, action was sky high, and the sound was so deep it sounded dull. Feel wise I was put off by the big neck. Thank goodness I didn't like it!!!
|
#48
|
||||
|
||||
Collings ships their guitars with higher action than some companies (Taylor in particular) probably as it's much simpler and cheaper to
lower action than to raise it (apart from using shims I suppose) (some players like and need higher action). So if you are comparing "as shipped" action among guitars in the store or if you have not adjusted the action height on your own Collings you may feel the action is a bit stiff.
__________________
Derek Coombs Youtube -> Website -> Music -> Tabs Guitars by Mark Blanchard, Albert&Mueller, Paul Woolson, Collings, Composite Acoustics, and Derek Coombs "Reality is that which when you stop believing in it, doesn't go away." Woods hands pick by eye and ear
Made to one with pride and love To be that we hold so dear A voice from heavens above |
#49
|
||||
|
||||
Quote:
|
#50
|
|||
|
|||
Quote:
__________________
Rick Ruskin Lion Dog Music - Seattle WA |
#51
|
|||
|
|||
I also think sitka collings are slinkier to play. I own a few and they feel looser than the adirondack models. The A models are still great at what they do. I've tried a ton of boutique makers and always come back to Collings.
|
#52
|
|||
|
|||
Quote:
Collings set up their guitars to 3/32" bass and 2/32" (sic) treble. They are surprisingly consistent on this which is why I usually had my action raised. I suspect that Martins would be expected to be a little higher. I know nothing of Taylors. I do know that Collings guitars are very well made and the tops are individually thicknessed (Bruce Van Wart) to give the appropriate resonance ... but STILL ... all new guitars need to be "played in/opened up" (same thing), and particularly a dreadnought, designed to be played hard, rather than "tickled"
__________________
Silly Moustache, Just an old Limey acoustic guitarist, Dobrolist, mandolier and singer. I'm here to try to help and advise and I offer one to one lessons/meetings/mentoring via Zoom! |
#53
|
||||
|
||||
Quote:
Many guitars ship with lower action (to the point where the treble string often easily buzzes out when I play them). In decimals concerning Collings versus Taylor (GA for example) the factory set clearances at the twelfth fret are: High E: 0.0625" Collings versus 0.0500" Taylor Low E: 0.0938" Collings versus 0.0800" Taylor P.S. The light gauge PB strings shipped with Collings (D'Addario) have slightly more total tension than those (Elixir Nano PB) shipped with Taylor.
__________________
Derek Coombs Youtube -> Website -> Music -> Tabs Guitars by Mark Blanchard, Albert&Mueller, Paul Woolson, Collings, Composite Acoustics, and Derek Coombs "Reality is that which when you stop believing in it, doesn't go away." Woods hands pick by eye and ear
Made to one with pride and love To be that we hold so dear A voice from heavens above Last edited by rick-slo; 05-28-2019 at 04:13 PM. |
#54
|
||||
|
||||
Quote:
I wonder if the D1 you tried had a VN (Vintage Now) or even a V (Vintage) neck profile, which would also come with wider 2 5/16 or 2 3/8 string spacing?
__________________
Merrill | Martin | Collings | Gibson For Sale: 2023 Collings D2H 1 3/4 Nut, Adi Bracing, NTB -- $4100 shipped |
#55
|
||||
|
||||
As someone who has played and owned several Collings over the years, I have read this thread with great interest.
Collings guitars have an articulate tone and do take some time to open up and play in. But, so do a lot of other guitars, made by other builders. It’s not unique to Collings. However, I do think the precise tone of a Collings may exacerbate this perception when a guitar is new. I also like Martins and H&Ds - the tone is different than Collings, but I don’t think they necessarily play easier. Again, “exceptions to every rule” still apply. My easiest playing guitar is an OM1JLA. With a fairly new Adi top, it is already warm, responsive, resonant, easy on the hands. Go figure. My point is...it is human nature to stereotype and categorize as it makes the world easier to understand. But, it can be a slippery slope. I, too, have been guilty and try to keep my ears open, and preconceived notions at bay.
__________________
Hope. Love. Music. Collings|Bourgeois |