#1
|
|||
|
|||
CF necks - truss rod / no truss rod
I'm looking for a proper CF gutar. I acquired a Journey travel 0f. I like it but the tone ain't all that. It is waaaay better than no guitar on a long trip though.
Some makes have truss rods some don't. I would think having one would be a good idea but I'm not up on t.r's in general. I liked (considering) a CA guitar I tried -an OX i believe it was - no truss rod. "no adjustment needed ever" Where is the adjustment? the nut/saddle? they never get tweaked? Why does Rainsong and Emerald feel the need? Different neck construction? thanks
__________________
"it is what it is" anon. |
#2
|
|||
|
|||
This is a question that pops up from time to time and it is a great question. The short answer is that carbon fiber guitars are "set and forget". What makes having a truss rod nicer, at least in my opinion, is that it will give you that much more control over your set up. Just like on wooden guitars, truss rods in carbon fiber are either to add or take away neck relief and that is it. Carbon fiber guitars certainly don't need it because the necks are so rigid- even to the point of going from light to medium strings. Your neck won't move.
So it basically comes down to preference.
__________________
Don't chase tone. Make tone. |
#3
|
|||
|
|||
Both Rainsong and Emerald use a truss-rod because "the customer wants/expects one".
If you don't have a truss rod, then you can't adjust the relief. How much relief do you like? Proper action is set by the relief, the nut slots, and the saddle height. (and on a few guitars like Taylors by an easily adjusted neck angle). So, without and adjustable rod, one of those adjustments isn't available. I have wooden guitars where I adjusted the truss rod sometime in the late 90's and haven't touched them since. But I did adjust them. My Rainsong WS3000 doesn't have a truss rod, and the relief is considerably larger than I like, so I keep it tuned down to lower the tension and flatten the neck. If it had a truss rod, I'd probably put almost a half turn on it and tune to pitch.
__________________
Larrivee OM-03RE; O-01 Martin D-35; Guild F-212; Tacoma Roadking Breedlove American Series C20/SR Rainsong SFTA-FLE; WS3000; CH-PA Taylor GA3-12, Guild F-212 https://markhorning.bandcamp.com/music |
#4
|
|||
|
|||
Let me encourage you to check out Blackbird guitars.
I've owned a number of CA guitars now, and I've never *loved* one that wasn't a Blackbird. Super OM is fantastic if you want CA....but the really amazing stuff is in their new line. I've got an El Cap that is in a league of its own....... |
#5
|
|||
|
|||
I've never felt the need for a truss rod on either Rainsong or my Blackbird Lucky 13. I couldn't tell you if the CA Cargo has a truss rod or not without digging it out to look. Emeralds come with TR's but except for a minor tweak of my recent X30, I've never touched any of them. In general you will only need to adjust the relief if you change tunings noticeably or change string gauges. As AZ said, it is good to have the option even if you never need it.
The Super OM (like all Blackbird CF instruments) is now out of production in favor of ekoa, but there are still some in stock at LA Guitar Sales when I looked last week. |
#6
|
|||
|
|||
thanks for the reassurance that no t.r. is ok.
I was looking at the CA OX because it is a bit larger than the Cargo and thin. 3.5" iirc. I like the fact that my 0f660 is thin (3") on the top side. Much to my chagrin, my right shoulder is not happy for long playing on a thicker side guitar - the 2 wood guitars are on their way out eventually. I did ponder thin bodied wood guitars but I want CF for the ease of maint. and no worry factor. Besides that they sound good and are cool!
__________________
"it is what it is" anon. |
#7
|
|||
|
|||
At some point, I was considering buying a used Composite Acoustics, but when playing it, I found the action up the neck was terrible. I remember sliding three quarters under the bass string at the twelfth fret, discovering there was no way to change the relief, and walked away.
So, if a guitar already has the relief you want with your desired string gauges, then no truss rod is needed. Similarly, if a guitar's relief is far outside your comfort zone, and there's no truss rod, then you're stuck. Incidentally, I once questioned a dealer's statement (specifically on a CA Ox) that "the relief is set automatically!" When pressed further, he admitted that the sutomer might not *like* where that relief gets set. *laugh* |
#8
|
|||
|
|||
I looked at two Lucky 13s. The relief was different on the two. I went with the one that had a shallower relief. It plays great but makes me wonder how much variance might change from CF guitar to CF guitar that are otherwise identical. Both played fine, but the relief was noticeably different on the two. I don't know if it was by design or if there was a range of manufacturing tolerances.
__________________
Cheers, Tom PS If you don't want to invest in yourself, why should anyone else even bother to try? |
#9
|
|||
|
|||
Perhaps related. Blackbird made two versions of Rider nylon--classical and flamenco., the set up was different (and perhaps other things). Anyway, could the 13s have been tailored to someone in particular? Just a thought.
|
#10
|
|||
|
|||
I think of truss rods on carbon fiber guitars like bracing. It's not needed as long as you're happy with the current setup. You can always sand the saddle to lower the action or replace it if you want higher action. I'm still yet to adjust the truss rod on my Emeralds no matter what string gauge I put on.
|
#11
|
|||
|
|||
Same Luva...never adjusted an Emerald, Rainsong or CA. Not even sure the CA had one, LOL
__________________
John |
#12
|
|||
|
|||
I was going to say it in my previous post but didn't want to sound like a smart alec but a lot of people misunderstand what a truss rod is for. It's sole purpose is for setting neck relief. It does indirectly impact action but should never be used for that purpose. Neck relief is the first thing adjusted on a new guitar followed by the nut and saddle. The nut and saddle are what should be used to adjust action. Truss rods need to be tweaked on wooden guitars due to temperature and humidity changes.
On a carbon fiber guitar without a truss rod the builder is supposed to make sure the neck has proper relief in the construction of the guitar, which is an ever so slight backbow. Earlier CA guitars (pre peavey) there were reports of incorrect neck angles. Those guitars should not have passed a QA inspection. Haven't heard of any issues with current CA necks. |
#13
|
|||
|
|||
thanks for that explanation.
So..if there is too much backbow it would affect the action as in too high? But the action could be high and the relief correct - a result of a high saddle or nut. I'm guessing there is more to it - like why there is relief in the first place. is there a standard measurement for relief? I do admit to thinkin the truss rod was there for the action. Still learning...
__________________
"it is what it is" anon. |
#14
|
|||
|
|||
Quote:
Last edited by GuitarLuva; 07-21-2019 at 10:36 AM. |
#15
|
|||
|
|||
I know that when I get feet buzz I look for a little relief.
Also, nice stuff GutarLuva. I've been surprised at how many people seem to be setting action by the truss rod. It's a natural thought, and may most likely change relief, but may also have unintended consequences. As you note, the saddle and nut should be the focus of establishing relief. Last edited by Guest 928; 07-19-2019 at 09:16 AM. |