#1
|
|||
|
|||
Yamaha FGX800C amplification issue
This has weird issue.
Output only works when tuner is on. As soon as tuner is off, it cuts the output signal. What's going on?
__________________
Acoustic-Electric: Yamaha FGX800C, Jim Dandy. Seagull S6. Electric: Schecter C1+, Aria Pro II Fullerton. |
#2
|
|||
|
|||
This sort of problem gets reported from time to time. Sometimes removing the battery, waiting a minute, and re-installing the battery will cure the problem. More often the on-board preamp needs to be replaced.
__________________
jf45ir Free DIY Acoustic Guitar IR Generator .wav file, 30 seconds, pickup left, mic right, open position strumming best...send to direct email below I'll send you 100/0, 75/25, 50/50 & 0/100 IR/Bypass IRs IR Demo, read the description too: https://youtu.be/SELEE4yugjE My duo's website and my email... [email protected] Jon Fields |
#3
|
|||
|
|||
Quote:
Battery was the 1st thing I thought of so I replaced them with fresh batteries and still the issue remains. I'll open it up and see if there's a cold solder joint or something visible.
__________________
Acoustic-Electric: Yamaha FGX800C, Jim Dandy. Seagull S6. Electric: Schecter C1+, Aria Pro II Fullerton. |