#16
|
|||
|
|||
Good to hear from another woodworker on the pathway. Have been trying to follow Grit Laskins' guitar plan from the 3 issue articles in Fine Woodworking magazine. There was a good detailed drawing in the 1st article but since it wasn't a full sized plan I had to use what I could to make layout patterns.
The top bracing has a smaller brace and a thin full width plate instead of a thicker single full width brace. Looking back I think I missed the boat on the bridge plate but for now will have to live with it. The 2 bottom braces per plan. So far the tap tones sound pretty good but will check again in a few days for the final adjustment if any needed. Bruce, |
#17
|
|||
|
|||
Got a little more done the past few days, the first boat of the 3, will do the back tomorrow and have a nice box.
Things seem to be going better since these builds aren't after a 2-3 year gap, easier to remember order of construction, how to do things, and what not to do. Hit 74 this year, think I'm still sharp mentally, but how do you know for sure. A few pics.... Bruce, |
#18
|
||||
|
||||
My father was the editor for Fine Woodworking from the very beginning (he was the first employee) up until they went full color. Then he moved into other areas of the company before leaving. He is retired now and does wood turning. What issue numbers are the Grit articles in?
I'd be interested in hearing how these sound, Bruce! |
#19
|
||||
|
||||
Quote:
best, Rick PS - I was the guy who wrote the moisture meter article and made the cradle out of cratewood. I guarantee that Dad will remember the moisture meter <LOL>. Please send my best!
__________________
”Lorem ipsum dolor sit amet” |
#20
|
|||
|
|||
Quote:
I think the ark of both mags follows a proverbial bell shaped curve, started out slow but good and got better until they peaked with many great issues and the declined to a lessor extent while still good just not great. Did your father have anything to do with bringing George Frank on board. What a great addition he was, a master refinisher and just about as good of a story teller. He has just about the most detailed article (issue #58- a issue that has an article by Grit on inlay by the way) on French Polishing you could ever find. The Grit Laskin guitar articles are #1 Nov/Dec 1987 issue #67; #2 Mar/Apr 1988 issue #69; #3 June 1990 issue #82. |
#21
|
||||
|
||||
Quote:
Rick
__________________
”Lorem ipsum dolor sit amet” |
#22
|
|||
|
|||
Rick, good point and so true one does see a lot of repetition not just in these things but in everything.
Back to the guitar works, got the box trimmed out. It's the best one I've done so far. Sides are vertical all the way around not canted out in some places and the box is very symmetrical for the most part. Big improvement over past builds. A few mistakes?, top bracing too thick at kerfing will need higher bindings, most likely a few others I just haven't found them yet. A few pics....some water on back -1st pic. Not the best pics in the world, might have to enroll in the "Mark Hatcher School of Guitar Photography." Bruce, |
#23
|
|||
|
|||
The work looks very clean and neat, only thing i would say is they are some pretty heavy braces over the sound board area, i would be a little concerned with the top being too stiff.
If your thinking about doing some binding, maybe hold off on the back until its a completed guitar that way you can see how she sounds and maybe measure bridge rotation, removing a back is easy without binding, not so nice when its all bound up Steve
__________________
Cole Clark Fat Lady Gretsch Electromatic Martin CEO7 Maton Messiah Taylor 814CE |
#24
|
||||
|
||||
I keep my autographed photo from when I met Norm Abrams in my lutherie shop, if that tells you my path to lutherie, also.
I agree with brad, not much translated directly, but indirectly, the attention to detail, knowing how to work with the wood rather than against it, etc, gave a definite head start. Beautiful pics!!
__________________
Dave F ************* Martins Guilds Gibsons A few others 2020 macbook pro i5 8GB Scarlett 18i20 Reaper 7 |
#25
|
|||
|
|||
Got some work in today on roughing out the necks. Making them out of Spanish Cedar, found some nice stock at local lumber yard.
Made a sled to use with router to rough out the base shape. Need a long router bit to get the job done, not too thrilled with a naked 2 1/2" bit. But with taking small bits and paying strict attention things worked out fairly well. A few pics... Bruce, |
#26
|
||||
|
||||
Bruce - I see what you mean about the 2.5 inch router bit. Glad all went well. Now you need to pick up a used cnc!
__________________
”Lorem ipsum dolor sit amet” |
#27
|
|||
|
|||
Got some work done this past few days on 2 of 3 (sounds like a Borg designation 7 of 9) a boat now a box....
Bruce, |
#28
|
|||
|
|||
I made a post in this forum about making the same transition from general woodworking to instrument making Although I would definitely be hesitant in how I label my self as a woodworker... I am definitely a hobbyist at best. I do a mix of welding/woodworking to create general goods like furniture and whatnot, but nothing at the professional level.
I am currently looking to take my first step into making instruments. Checking out some kits, plans, etc. Very exciting, but daunting. Your guitars are really great! |
#29
|
|||
|
|||
Got a little more work done the past few days, have 2 I guess what they call "In the White." Have a coat of pour fill on for protection now will sand out and recoat later.
Have been having troubles with the bindings, not sure if I would say "I hate binding," maybe because I'm not good at it or I'm not good at because I hate it. Might have to rethink and maybe try some of the methods a few of the builders on this site have shared with us. Great to have a site where guys who know what they are doing so freely share their hard earned knowledge/skills. A few pics.... Bruce, |
#30
|
|||
|
|||
They look great!
|