Should action be even up and down the neck

[awarren82]

I just bought a new Eastman e10-om and the action is much lower frets 1-5 and then gradually gets higher as you move up the neck. Is this normal? I'm wondering if the nut is cut too low. The action measure is good at the 12th fret = about 6/64 on bass and 4-5/64 on treble. I tried to photograph but it's too hard to get a good picture.

[fitness1]

Totally normal

[awarren82]

Originally Posted by fitness1

Totally normal

awesome! thank you. I just returned a Martin 000-18 for this. It definitely does not sound quite as good, but it's also nowhere near 1/2 as good as the price would dictate. amazing value overall.

[fitness1]

Here's a great resource for you from one of the top techs in the country (who's also a member here)

Pretty much everything you need to know can be found on these pages:

http://frets.com/FretsPages/OwnerMan...nssguitar.html

[awarren82]

Originally Posted by fitness1

Here's a great resource for you from one of the top techs in the country (who's also a member here)

Pretty much everything you need to know can be found on these pages:

http://frets.com/FretsPages/OwnerMan...nssguitar.html

phenomenal guide. thank you. specifically the part about nut height was really helpful so far.

[bls82261]

Originally Posted by fitness1

Here's a great resource for you from one of the top techs in the country (who's also a member here)

Pretty much everything you need to know can be found on these pages:

http://frets.com/FretsPages/OwnerMan...nssguitar.html

Thank you for this link!