#1
|
|||
|
|||
Tele neck and bridge question again
As I have been mentioning about going to a wider neck; I think other issue would be wider spacing at the bridge ,does Warmouth sell anything to help with this? Someone mentioned that it would not work here, not sure .Thanks for putting up with my dumb questions.
|
#2
|
|||
|
|||
Personally--- I have never seen anything of the like to what you are asking for.
The parts are pretty standard throughout.
__________________
Ray Gibson SJ200 Taylor Grand Symphony Taylor 514CE-NY Taylor 814CE Deluxe V-Class Guild F1512 Alvarez DY74 Snowflake ('78) |
#3
|
|||
|
|||
Just wider string spacing at the bridge?
|
#4
|
|||
|
|||
If you know the neck width that you want to use, you could compare it with other guitars using the same width, and use whatever bridge that they use. You would need to glue and plug the string thru body holes, and redrill if the difference is huge. You could call Warmoth and speak with them directly. They are very nice folks, and the will do custom work.
|
#5
|
|||
|
|||
I have never seen anything like you are asking about. Seems to me that if you went with wider bridge spacing, you would wind up with strings not passing over the pole pieces of the pickups.
|
#6
|
|||
|
|||
I think you're swimming upstream, and I suspect the only way you'll get what you really want is a full custom build.
|
#7
|
|||
|
|||
Quote:
|
#8
|
|||
|
|||
If you go with the traditional 3 saddle bridge with smooth saddles (no string groove) you have some play.
I play with a pick, mostly, but after going with a wider neck on my tele I noticed no issues with string spacing at the bridge. |