#1
|
|||
|
|||
Rainsong vs Emerald X20 (again)
Well, i have that itch for a new guitar, and I am trying to decide between a Rainsong OM and an Emerald X20...and I have permission to proceed from my lovely, smart, wonderful wife. But I have not played either guitar, which makes me a bit nervous. A couple of questions:
1. I play a Taylor 114ce now and I do like the neck on that guitar a lot. I have measured the fretboard width at the nut as 1-11/16 inch. I see the fretboard width on both CF guitars as 1-3/4 inch...I don't see that as a problem. But I am concerned whether one of those necks is considerably "fatter", thus making it more difficult for me to play as I do not have big hands. Can anyone compare for me the necks on the Rainsong and the X20 with the Taylor 114 neck? 2. I do not see any fretboard markers on the Rainsong C-OM. Are there any? While that may not be a deal breaker, it would be a bit weird. 3. The pickup choices on the stock models would push me a bit toward the Rainsong as I don't really like the battery in a bag, but apparently others have learned to live with it. Any guidance for me here? 4. One last question. Is the Emerald factory on shutdown now? Reopening? Thank you kindly. Last edited by zeeway; 08-14-2017 at 07:53 AM. |
#2
|
|||
|
|||
Quote:
I can't help you with the comparison question you have. Emerald has stainless steel frets, if that makes any difference. I don't like batteries in my guitar either, and went with K&K mini in my Emeralds.
__________________
Emerald 2016 X7 2017 X20 2018 X30 And four all laminate wood acoustic guitars Last edited by 121; 08-14-2017 at 08:07 AM. |
#3
|
||||
|
||||
I have an Emerald guitar, but have never played a Rainsong. I have read a lot of comments about the necks of both on this forum. Others with experience with both will likely reply, but my sense is that the Emerald neck is closer to the Taylor neck profile to that of the RS N2 neck. If in fact you want the exact Taylor profile, Emerald can and will do that for you, likely for an upcharge. They are the only builder that will accommodate that. Btw, Emeralds do not have fretboard markers (which I tend to prefer on CF guitars), but they do have side markers which as playing references are equally fine.
__________________
Tom '21 Martin D-18 Standard | '02 Taylor 814c | '18 Taylor 214ceDLX | '18 Taylor 150e-12 | '78 Ibanez Dread (First acoustic) | '08 CA Cargo | '02 Fender Strat American '57 RI My original songs |
#4
|
|||
|
|||
The N2 neck typically used on the newer Rainsong guitars will be considerably thicker than the standard neck used on the X20. If you want a neck profile similar to your Taylor guitar, you can go with the standard Emerald X20 neck profile, or the original Rainsong N1 profile.
|
#5
|
|||
|
|||
I'm not sure about the rainsongs, but my emerald x20(that I just got a month ago) doesn't have fretboard markers (fretboard inlay) either... Only the sidedots
__________________
Yamaha FG800 2017 Gibson J-45 Standard Boucher OMH Custom (Master Grade Adi/MDR): http://www.acousticguitarforum.com/f...d.php?t=471264 |
#6
|
|||
|
|||
Rainsong neck is pretty fat. I actually don't find it that dissimilar from the 1-3/4 inch Taylor necks... but it will feel bigger than the neck on the 114. Can't speak for the Emerald.
__________________
Sundad Music |
#7
|
|||
|
|||
If I were you I would find a Rainsong in a shop somewhere and make a road trip to play it so you can judge the neck all the profiles are the same on new ones. I share you love for a Taylor type profile and Emerald would be closer. Rainsong's profile is fuller and if you wrap you thumb around the neck could present issues? I don't have large hands and do wrap my thumb around to play the low E at times. I can adjust to the N2 but it's not my favorite. It's was not a deal killer because Rainsong makes a great guitar but it's something I would check out myself, even I'd it involves a long road trip.
__________________
Steve 2020 McKnight Grand Recording - Cedar Top 2005 McKnight SS Dred 2001 Michael Keller Koa Baby 2014 Godin Inuk 2012 Deering B6 Openback Banjo 2012 Emerald Acoustic Doubleneck 2012 Rainsong JM1000 Black Ice 2009 Wechter Pathmaker 9600 LTD 1982 Yairi D-87 Doubleneck 1987 Ovation Collectors 1993 Ovation Collectors 1967 J-45 Gibson 1974 20th Annivers. Les Paul Custom |
#8
|
|||
|
|||
Quote:
As to the Rainsong vs x20 question, you would need to be more specific as which Rainsong you are looking at as they have dozens of different options in the OM size alone. You can get one without fret markers, with dot markers, or the classic shark inlays on the deluxe models, and depending on series, four different electronics option. Regarding size, the Rainsong OM is actually smaller than the x20, which is closer to the WS size. Basically the Rainsong OM is like the Taylor Grand Concert (GC), and the Rainsong WS is closer to the size of the Taylor Grand Auditorium (GA), like your 114. As to neck shape, neither is like the Taylor shape, but both are close enough that you should have no problem making the transition. In fact for me, the Rainsong N2 neck might actually be more comfortable than the Taylor necks found on Mexican guitars like your 114. FYI the folks at Rainsong, working closely with Steve Miller, put a lot of thought and effort in to the design of the N2 neck shape, and it has paid off with thousands of satisfied customers. The new N2 neck was so popular in fact, that they eventually dropped the older lower profile N1 design. I would also suggest you find a Rainsong dealer near you, and try some different models to try, then have your dealer give you all your options within your price range. If your dealer doesn't have the exact model you want, a special order only take 4-6 weeks. Good luck! Last edited by Ted @ LA Guitar Sales; 08-14-2017 at 11:31 AM. |
#9
|
|||
|
|||
Quote:
Rainsong saw that Steve Miller was using a Rainsong guitar on stage at times and could see the value in a celebrity endorsement, something carbon guitars have always lacked. They got together with Steve and he brought in John Bolin the maker of his electrics and one of the premier electric builder for rock electrics. http://bolinguitars.com John came up with a modified U shape which is more common on electric guitars, especially early models. Rainsong also made the decision to add a truss rod, a major stubbling block for many wood guitar owners. Steve Miller seems to have been a short lived influence. Rainsong now has developed a new neck profile with a truss rod and has invested in the mold with a molding process different from the N1. The investment and the addition of the truss rod effectively killed the N1, given a choice most all buyers would opt for a truss rod just for fine adjustment. (I would as well). And most player aren't into fine differences in neck profiles. I think the N2 is a unique profile no other acoustic maker has chosen to make. I have asked numerous times for a acoustic guitar with a U profile of any kind and I have never been given an example. All that being said it is not a bad profile just unique, one I would not choose but one that will not keep me from buying and keeping Rainsong guitars. They are absolutely wonderful guitars, that I would love to see in two neck profiles.
__________________
Steve 2020 McKnight Grand Recording - Cedar Top 2005 McKnight SS Dred 2001 Michael Keller Koa Baby 2014 Godin Inuk 2012 Deering B6 Openback Banjo 2012 Emerald Acoustic Doubleneck 2012 Rainsong JM1000 Black Ice 2009 Wechter Pathmaker 9600 LTD 1982 Yairi D-87 Doubleneck 1987 Ovation Collectors 1993 Ovation Collectors 1967 J-45 Gibson 1974 20th Annivers. Les Paul Custom Last edited by Doubleneck; 08-14-2017 at 01:58 PM. |
#10
|
|||
|
|||
Quote:
Quote:
|
#11
|
|||
|
|||
I think the Rainsong guitars I have played are awesome, and I would love to have one. I do have an X20, and it's amazing and I wouldn't trade it for a Rainsong (or a high end Taylor even). The neck is different from the Taylors I have played, but it's not too different. The X20 is a great strumming guitar that I find myself using for picking more and more. Maybe I am getting better or maybe I am getting stronger, but either way it's my go to guitar.
Though I am biased by having an X20, I am pretty sure you should be good with either.
__________________
Cheers, Tom PS If you don't want to invest in yourself, why should anyone else even bother to try? |
#12
|
|||
|
|||
Thanks for all the replies. Looks like I need to find a Rainsong to get my hands on...even though there are no official dealers listed for S.C.
__________________
Angie |
#13
|
|||
|
|||
I have a Taylor 314 and an Emerald X20 and also have hands that are on the smaller side of average.
While I really like the Taylor neck, I MUCH prefer the standard Emerald X20 neck! I find my fretting hand negotiates the fretboard in a more natural and comfortable manner. I'm not sure of the specs but I suspect the string spacing at the saddle on the Emerald is slightly wider than the Taylor as I find my right hand work is easier too. I've never played a Rainsong so am no help there. |
#14
|
|||
|
|||
Dangnabbit, I just finished a road trip to Charleston. Could have brought my Rainsong Shorty or Rainsong P12 for you to try. Anyone else down SC way who might help out Angie?
|
#15
|
|||
|
|||
I have an Emerald X20 and a RainSong Shorty SG-FLE (closest thing to it now is the CH-OM). For comparison sake, I also have several Taylors (used to have a 114ce, so I am familiar), and I am a big fan of that neck. For my money, Taylor has the best neck feel in the acoustic business.
The N2 on my RainSong Shorty is considerably thicker (from my perspective) than the typical Taylor neck. While that doesn't keep me from enjoying the Shorty, it is more work on my left hand. 24.875" scale. The X20 is closer to the Taylor neck, maybe just a bit thicker, but definitely feels less full (and more comfortable to me) than the RainSong N2 neck. 25.5" scale. I prefer the feel and playability of the Emerald neck. That said, each person has their own "feel preference," so it would be best for you to try each. Not easily done, since Emerald (in Ireland) is direct sales only. My feeling is you can get used to another neck profile. There will be the sound that you prefer, and (again, for me) the X20 has that over the RainSong Shorty. Not that the Shorty is bad - a lovely piano-like tone... but, the X20 is deeper and richer sounding, and more powerful when pushed. I will freely admit that I am a big fan of that offset soundhole on the X20, where the player can experience the sound as much as those in front of the guitar. They really are two very different playing experiences. Both are nice guitars. My recommendation would be for the X20... you will be impressed with the ergonomics of that guitar, with the designed-in arm bevel, the rounded edges, the almost sensuous cutaway... and the sound. Welcome to the Carbon Fiber Sub-forum - lots of good info here. Folks who have, have had, or have played all the different CF options. People often come here for recommendations or to find out more about the carbon fiber experience. Cut to the chase: it's good. Really good. Jim |